View Full Version : how do you change your oil?
b7lee
3rd August 2008, 16:37
i am trying to change the oil but i crnt seem to find the drain off value on my mk2 saxo can anyone help ??
TU-Tuning
3rd August 2008, 16:39
its on the sump underneath the engine mate, its a plug you need to remove it
potatopete
3rd August 2008, 16:40
I've never changed the oil - I always get it done at my garage....
However, as with any car, should be under the engine, in the middle. Look for a big-ish nut, there won't be any others to mix it up with. Sorry I cant be more help, but like I said, I dont do my own changes!
b7lee
3rd August 2008, 16:41
is it like a nut with an allan key fittin to relese it?
potatopete
3rd August 2008, 16:42
is it like a nut with an allan key fittin to relese it?
No, just a bolt you need to undo with a spanner. About 13mm, maybe 15mm.
TU-Tuning
3rd August 2008, 16:42
yeah but its not an allan key fitment mate, its a special sump plug key fitment. The keys are about a fiver from halfords and they fit onto a ratchet. Dont try and cut corners and use mole grips wtc as youll prob round it off, and its a bastard to do with a spanner if its been tightened up properly
b7lee
3rd August 2008, 16:44
kk thanks alot m8
RCD-Performance
3rd August 2008, 16:44
Agree with the above, buy the tool :)
Saxo-Slag
3rd August 2008, 16:48
Right i always use engine flush when doing the oil.
-I pour the tin in and run the engine for good 15-20mins.
-Turn engine off.
-remove drain plug with container underneath to catch oil.
-take oil filter off.
-Leave till all oil is out.
-Refit drain plug and fit new oil filter.
-Fill with oil.
-Take for lil drive then check oil level when cold and top up if needed.
RCD-Performance
3rd August 2008, 16:51
And...end of thread :)
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.