kent cam

[dobbo_1]

http://cgi.ebay.co.uk/kent-cam-piper-pulley-saxo-vtr-106-rallye-1-6-8v_W0QQitemZ250283886164QQcmdZViewItem?hash=item25 0283886164&_trkparms=72%3A1121%7C39%3A1%7C66%3A2%7C65%3A12%7C 240%3A1318&_trksid=p3286.c0.m14

will this fit a mk2 02 vtr engine says its to fit roller type but im unsure and will i require a remap with these cams?

[leeds106]

dunno why the guy aint fitting it cos it will fit his s2 rallye


its a very mild cam so no remap would be needed

[dobbo_1]

cheers mate what bhp increase would i be lookin at?

[phillyc]

I was lookin at these cams. I asked him if they fit the mk2 and he said he finks so.
does any1 know for sure if they are the roller type

[leeds106]

check the cam code on the kent cam site and see what its for although im pretty sure its for roller rockers

[kbracing]

Be careful as i ordered the wrong cam for my vtr (ordered to not roller cam type)

The engine ran but did not tick over i had to restrip the head and put the right cam in
Runs well with the standard ecu but looking to install an Emerald to gain the max from this

P.S. i know of 2 other guys that got the wrong cams one other kent but also a piper

If you want a non roller black top cam i have one for sale

PM me

Keith:wink:

[kbracing]

Be careful as i ordered the wrong cam for my vtr (ordered the non roller cam type)

The engine ran but did not tick over i had to restrip the head and put the right cam in
Runs well with the standard ecu but looking to install an Emerald to gain the max from this

P.S. i know of 2 other guys that got the wrong cams one other kent but also a piper

If you want a non roller black top cam i have one for sale

PM me

Keith:wink: