Would This??

[Graeme]

Would this amp power two of these subs???

Amp (http://www.bassjunkies.com/index.php?cpage=product/browse_detail.php&area=shop&category_id=88&sub_category_id=5&manufacturer_id=498&product_id=27792&show_my_car=&return_link=%2Findex.php%3FP%3Dpbb%26A%3Dshop%26ci d%3D88%26scid%3D5%26mid%3D498&source=brand)

Subs (http://caraudiosecurity.com/shop/product/products_id/3445.html)

thanks

[Scott]

post up the rms figs of both, sorry im at work and ill get my baws toed for wandering around internet to muchsmileys/smiley17.gif

[Propagand]

Would this amp power two of these subs???

Amp (http://www.bassjunkies.com/index.php?cpage=product/browse_detail.php&area=shop&category_id=88&sub_category_id=5&manufacturer_id=498&product_id=27792&show_my_car=&return_link=%2Findex.php%3FP%3Dpbb%26A%3Dshop%26ci d%3D88%26scid%3D5%26mid%3D498&source=brand)

Subs (http://caraudiosecurity.com/shop/product/products_id/3445.html)

That sony gives about 800W measured power in 1ohm. That's enough for most of people smileys/happy.gif

Those pioneers are shite! Go for something else, but not sony.

thanks

[Propagand]

[QUOTE=g_moore_123] Would this amp power two of these subs???

Amp (http://www.bassjunkies.com/index.php?cpage=product/browse_detail.php&area=shop&category_id=88&sub_category_id=5&manufacturer_id=498&product_id=27792&show_my_car=&return_link=%2Findex.php%3FP%3Dpbb%26A%3Dshop%26ci d%3D88%26scid%3D5%26mid%3D498&source=brand)

Subs (http://caraudiosecurity.com/shop/product/products_id/3445.html)

That sony gives about 800W measured power in 1ohm. That's enough for most of people smileys/happy.gif

Those pioneers are shite! Go for something else, but not sony.

[reevesy_vtr]

i would not run that at 1ohm it would melt.

[Graeme]

post up the rms figs of both, sorry im at work and ill get my baws toed for wandering around internet to muchsmileys/smiley17.gif


the amp= 900w rms

the subs= 350w rms each!

[Propagand]

i would not run that at 1ohm it would melt.

My mistake.
I mean 2ohm load, not 1ohm..

And what comes to that power handling thing. You can't really have too much of power. Ok, I'm not talking that you can shoot 10kW to a tweeter but really, soundquality provens a lot if you've power to run the speaker. No, I don't mean with soundquality that it can produce lots of soundpressure.. I'm talking things like dynamic and separation..

You can have powerfull amp but you don't have to screw the gain to its max.

[Scott]

exactly its always better to have an overly powerful amp and turn the gain down, than having a less powerful amp and turning the gain right up

[Graeme]

so yes but turn the amp as low as poss??

[S9_DAN]

It will run it but it is only 1 channel, to get the best sound out of the subs i would think you would need a 2 channel amp? smileys/smiley5.gif

[Scott]

nope wire the two subs together to show 2 ohm load to a single channel.