View Full Version : Important! : Vtr (pug sport system)
higgz121
1st November 2008, 00:05
Will a pugsport strate through decat system fit a 2000 saxo vtr?
HELP!:afro:
Mark51
1st November 2008, 00:09
moved sections mate.
from what i remember it will but the back box will not sit in the cut out in the back bumper.
-Jason-
1st November 2008, 00:36
A 106 box sits differntly to a saxo so will sit further towards the centre of the car then in the recess on the bumper
However physically all the joints should fit but if your manifold has the cat in it it still wont decat the car
Nick_106
1st November 2008, 06:16
A 106 box sits differntly to a saxo so will sit further towards the centre of the car then in the recess on the bumper
However physically all the joints should fit but if your manifold has the cat in it it still wont decat the car
It might decat it depends on if its 3 plug or single plug!
As been said, it wont fit in the bumper recess because the 106 pugsport sits more towards middle of the car!
higgz121
2nd November 2008, 13:48
Cheers my cat is under the car as its only a mk1 engine i beleive the cat is only in the mani in the mk2 bt i cd b wrong.. but myn is def under the car.
thanks
higgz121
2nd November 2008, 13:48
Also does any one know if it will even sound that good?
Sophia_Bush
2nd November 2008, 13:53
you know what you could do? buy the pugsport centre secion get a magnex/scorpion/piper saxo back box. They won't done direct but make a joiner pipe job done
AlexB
2nd November 2008, 13:59
just cut a new recess in the bumper and fibreglass up the old one job done
would sound mint mate thay allways do
nice and raspy
Steve
2nd November 2008, 14:03
Will a pugsport strate through decat system fit a 2000 saxo vtr?
HELP!:afro:
no, its doesnt line up with the hole in the VT bumper.
106 backbox's sit lower then saxos also.
Just get a supersprint for similar sound or omp inox 2inch system for exact sound.
Cant see the point messing on trying to get it to fit, when there is other well made, and recommended systems to fit the saxo direct.
Mark51
2nd November 2008, 14:49
^^ the supersprint looks alot better imo but the OMP does sound nice.
do you go for looks or sound though, that is the question?
Steve
2nd November 2008, 14:51
^^ the supersprint looks alot better imo but the OMP does sound nice.
do you go for looks or sound though, that is the question?
or performance < although i dont think you would notice it tbh.
Personally supersprint, sounds very similar looks better and its alot cheaper.
OMP one the 2inch pipe is fairly long and looks odd imo also its too raspy for a saxo imo raspy suits the 106 more then the saxo
If you search i covered it with videos the other day in another members thread ;)
TypeRhys
2nd November 2008, 15:04
Also does any one know if it will even sound that good?
Plenty of 106's in South Wales running pugsports.
IMO the best sounding exhaust for the saxo/106.
The supersprint doesn't even come close for sounds, plus its tail pipe is like
something found on a metro.
higgz121
2nd November 2008, 22:31
y go for looks sound or performance when you could just go for all 3?
AlexB
2nd November 2008, 22:44
wont look great though as its about 2 inches away frm the recess in a saxo bumper
Ash-VTR
3rd November 2008, 16:50
Does the system sit mroe central at the back? Does it not connect direct to manifold? Starts at the cat under the car?
Steve
3rd November 2008, 17:05
Does the system sit mroe central at the back? Does it not connect direct to manifold? Starts at the cat under the car?
it connects fine, it doesnt sit in the cut out of the bumper. and hangs a fair bit lower.
TypeRhys
3rd November 2008, 17:15
Its just a question of sounds/performance vs looks/fit
mjLvts
3rd November 2008, 17:40
look at my photos video thread mate i got one on mine
Ash-VTR
4th November 2008, 13:37
good stuff
Ash-VTR
4th November 2008, 13:38
looks sick to be fair, how youve done it
mjLvts
4th November 2008, 13:42
quite easy. the exhaust fits easy with the saxo hangers, so basically you just need the exhaust cut out filling up, theres numerous wasys u can do it,
plastic bonding
fiberglass
plastic welding
just filler
just ur choice at the end of the day, or wat ur local body shop advises u, i got mine done at work :) so i was ok.
i also removed my toe hook
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.