Log in

View Full Version : My RR results inc. graphs

cj_99
5th November 2008, 09:07
The car is 2002 saxo furio 1.4 with 42,000. Im abit gutted to be honest with it i was hoping to get more out of her to e honest. I made 74.01bhp on my first run and this is the print out of my second run which is 73.8bhp with 100lbs/ft of torque they also said that my fueling was spot on so i dont know why the decrease :(, anywho this was made with a 4-2-1 mani, supersprint straight through exhaust system and and raceland enclosed induction kit with k&n filter, im just wondering if someone could shed some light on why my figures are so low with these mods

cheers Callum

p.s heres my graphs ;)

http://img504.imageshack.us/img504/9964/04112008450rh9.jpg (http://imageshack.us)

http://img47.imageshack.us/img47/425/04112008451ku1.jpg (http://imageshack.us)
cj_99
5th November 2008, 09:44
bump!!
David
5th November 2008, 10:15
What you bumping?
Why is there like, 15 bhp difference?
Was one done one standard? :S
Scattle
5th November 2008, 10:20
What you bumping?
Why is there like, 15 bhp difference?
Was one done one standard? :S

Guessing one was done as at the wheels figure? and the other is flywheel?
cj_99
5th November 2008, 10:26
bumping so i could get it to the top of the list ;)
first graph is at the wheels and shows the fueling and bhp
second graph shows fly wheel figures and torque figure

just wondering what improvements other people have got with similar mods as mine seem to be very low :(
Toad
5th November 2008, 12:55
That seems like a lot of torque for a 1400cc. I don't know what it's mean't to be, but 100lb/ft is good IMO. Is it normal that the torque peaks at 2650rpm?
Steve
5th November 2008, 13:00
bumping so i could get it to the top of the list ;)
first graph is at the wheels and shows the fueling and bhp
second graph shows fly wheel figures and torque figure

just wondering what improvements other people have got with similar mods as mine seem to be very low :(

Bumping this is just makes you a ASW :afro:
cj_99
5th November 2008, 13:17
Bumping this is just makes you a ASW :afro:

ASW? i dont know that one
cj_99
5th November 2008, 13:21
That seems like a lot of torque for a 1400cc. I don't know what it's mean't to be, but 100lb/ft is good IMO. Is it normal that the torque peaks at 2650rpm?

they guy at apt did say that its a very good figure, i couldnt tell you to be honest i thought it should peak about 3000-3500 correct me if im wrong somebody, ohwell it just means that i get to spend more money on it or look for a 16v lump ;)
David
5th November 2008, 13:23
ASW? i dont know that one

asswipe iirc
Steve
5th November 2008, 13:24
ASW? i dont know that one

attention seeking whore lol
Toad
5th November 2008, 13:29
they guy at apt did say that its a very good figure, i couldnt tell you to be honest i thought it should peak about 3000-3500 correct me if im wrong somebody, ohwell it just means that i get to spend more money on it or look for a 16v lump ;)

The later being the most cost effective way forward.
cj_99
5th November 2008, 13:34
attention seeking whore lol

lol i do try my best :y: