silicone

[dannyc]

Need some details please!

Got a BMC CDA... and a MK1 blacktop VTR.

Im wanting samco for both sides of the BMC! Firstly the bend from the samco to the engine... Need both dimensions for both sides.

Also the dimensions for the opposite side, the bmc to the Standard VTR scoop that connects to the slam panel!

:afro:Cheers

[ldavies]

hope this helps mate

http://i282.photobucket.com/albums/kk247/lee2806/bmcfitted2va31.jpg

[dannyc]

excellent mate cheers, just need to figure out the bit for the slam panel now! spose ill go measure

[dannyc]

maybe ill go to a shop that sells hosing and ask them to help me match it up, might be easier!

[Saxo_Scott]

just for your info, the other side of the CDA is 70 also.

not sure of the slam pannel size

[Bish_HB]

Is this the same sizing for a mk2 VTR?

[Bish_HB]

Sorry for the DP, But ive just bought one and ive been given different measurements on the silicone hosing to get, so please can somebody tell me the exact ones, also do i need a reducer hose?

[swampy]

No you need shiney bolts as per for sale section