BMC CDA and Silicon Hosing

[Bish_HB]

Hello, ive just bought a BMC CDA enclosed induction kit for my vtr.

I need to know what sizes of silicon hosing i need for it, Ive seen the pic going around of some sizes but what i need to know is does this count for all bmc cdas?

also is it just two 90 degree angle bends or do i need anything else?

Plus is it woirth getting an oil catcher? if so whats the one i need to get?

Thanks

[Bish_HB]

Morning Bump

[Bish_HB]

sorry for another bump but i need to know asap.

[Matt]

all you need is the 90 degree bend. Give samco a ring or sfs perfromance.

ps. along as you have an oil breather already

[Bish_HB]

Yeah i wont fit it untill i have the Oil breather ready, Not sure wheather or not to install an Oil Catcher though?

If i get a breather will there be much oil coming from it?

[SaxoFurio1988]

Yeah i wont fit it untill i have the Oil breather ready, Not sure wheather or not to install an Oil Catcher though?

If i get a breather will there be much oil coming from it?

Don't get a filter for the oil breather mate.. Oil goes everywhere, all over the engine block, right to the back of the throttle sensors etc.. Its a nightmare, i got one on now. Definatly get an oil catch tank. Im getting one on payday :y:

[Bish_HB]

which tank are you getting mate? i have no idea which one to get or where from.

[SaxoFurio1988]

which tank are you getting mate? i have no idea which one to get or where from.

I'll be getting mine off ebay.. £34 posted.. here's the link:
http://cgi.ebay.co.uk/SALE-ROUND-OIL-CATCH-TANK-SILVER-9mm-15mm-Fittings_W0QQitemZ300264281516QQcmdZViewItemQQptZU K_CarsParts_Vehicles_CarParts_SM?hash=item30026428 1516&_trksid=p3286.c0.m14&_trkparms=72%3A1299%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318

Be getting different hoses though.

[Bish_HB]

That one looks tidy, where does it mount though?

[Bish_HB]

Still after the hose sizes if any one can help me please.

[SaxoFurio1988]

That one looks tidy, where does it mount though?

Wherever you want it lol... You could probably mount it onto an existing bolt :y: Im gonna try and bracket mine on the battery tray bolt. As for the size, im pretty sure its 15mm.

[Bish_HB]

Wherever you want it lol... You could probably mount it onto an existing bolt :y: Im gonna try and bracket mine on the battery tray bolt. As for the size, im pretty sure its 15mm.

Ok mate nice one :y:

[SaxoFurio1988]

Ok mate nice oe :y:

get pics up when you fit it :y:

[Saxo_Scott]

pretty sure the hose size is 70mm but not sure what size the throttle body is on a vtr

when i had my furio i had to get a reducer hose that went from 70mm down to 57mm

http://i270.photobucket.com/albums/jj99/slinkyscott/100_0082.jpg

[Andyc123]

yeah im after this info too! my hose split which is on car now.. I thought it was 60mm on VTR, from the 70mm at the BMC end. soo a 90 degree angle, with a reducer i'd imagine?

[Saxo_Scott]

if the throttle body on a vtr is 60 then yeah go for a 70 to 60mm reducer.

[SaxoFurio1988]

pretty sure the hose size is 70mm but not sure what size the throttle body is on a vtr

when i had my furio i had to get a reducer hose that went from 70mm down to 57mm

http://i270.photobucket.com/albums/jj99/slinkyscott/100_0082.jpg

He wanted the hose size for the catch tank hose, not the throttle body for the BMC

[dannyc]

He wanted the hose size for the catch tank hose, not the throttle body for the BMC

your incorrect, read his initial post, he wants sizes for the 2 90degree bends

[Bish_HB]

yeah i was after sizes for both ends please :y:

[Bish_HB]

sorry for the DP. Just got the BMC, measure the diameter on it and it coms to 80mm? is this correct?

[Saxo_Scott]

LOL at saxo furio 1988 trying to be a smart arse and you fail looolz

http://i270.photobucket.com/albums/jj99/slinkyscott/2043-fail-camera.jpg


the CDA should be 70mm. well thats what it was on mine.

[SaxoFurio1988]

[QUOTE=Saxo_Scott;2743269]LOL at saxo furio 1988 trying to be a smart arse and you fail looolz

I think your the one thats trying to be the smart arse mate.. I mis-read the post.

Twat