furio with vtr bottom end

[tazz]

hi basically i have a 1.4 mk2 furio.
wanted to know if i was to swap the mk2 vtr same year bottom end with the 1.4s would it make any difference and be worth it.
as ive heard that the only difference with the two engines is the bottom end.

thanks

[VTEC-Saxo]

if you have access to a bottom end then you should have access to just drop a full vtr lump in, why wast time farting about cost more than its worth.

[Ryan]

if you have access to a bottom end then you should have access to just drop a full vtr lump in, why wast time farting about cost more than its worth.

because sometimes the heads are fucked ;)

[tazz]

because sometimes the heads are fucked ;)

lolll
i wanted to do this because i have a vtr engine which is from the same year as my furio however have not got the ecu or loom for that engine
so would i be able to swop the engines without needing to change the loom and ecu ?

[VTEC-Saxo]

because sometimes the heads are fucked ;)

ahh dint think of that tbh lmao cheers ryan :D

[tazz]

lolll
i wanted to do this because i have a vtr engine which is from the same year as my furio however have not got the ecu or loom for that engine
so would i be able to swop the engines without needing to change the loom and ecu ?

anyone know the answer

[tazz]

i can get a vtr ecu but however have not got the loom can i used the furios loom and get the vtrs ecus unlocked

[PETE-VTR]

anyone know the answer

furios are a 1.4 and VTR 1.6, so yes you would need the ecu, the loom should be the same...

[tazz]

so i wont need to change my loom only the ecu mate

[VtsTom]

so much easier to just bung a whole vtr lump, would only take a few hours. Plug and play jobby with the loom and ECU. The 2 lumps look identicle for Mr. Plod aswell.

Just so happens im selling one ;)

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=170291886916&ssPageName=STRK:MESE:IT&ih=007

[Prickle]

ahh dint think of that tbh

you never do, do you ;)

Tbh id just wack the whole 's' or 'r' engine in :)

[tazz]

i will be putting the whole vtr engine in however i have not got the wiring loom can i use the furio loom ???? i have the vtr ecu i will get that unlocked
wil this work both engines are from 2001 ?

[danvtslondon]

just buy a vtr/s much easier man

[tazz]

well ive sepent alot of money making it the way i want dont want to start again and wouldnt cost me anything but the cost of unlocking the ecu if this works mate

[tazz]

i will be putting the whole vtr engine in however i have not got the wiring loom can i use the furio loom ???? i have the vtr ecu i will get that unlocked
wil this work both engines are from 2001 ?

does anybody know ?

[tazz]

nobody know if this will work