View Full Version : Missing parts I think?
Jorge-
6th January 2009, 17:15
1. Oil breather I think?
2. EGR Valve is that? Did I read it can be removed? (I am searching now)
3. Front airbox feed?
All 3 of these will be sorted out tomorrow, when the enclosed kit gets fitted, but that pipe coming from the front of the cam cover is going to cause a problem with the feed pipe I can see.
You can just make out the circles and numbers when you view it full.
http://i7.photobucket.com/albums/y267/j0rg3/missinganderg.jpg
AlexB
6th January 2009, 17:25
1 is the breather you need a new 90 degree pipe for it
2 is the fresh air pump
yes you can remove it
3 is over the top rad hose
but yes there should be air pipe feeds there
the induction kit rectifies number 3
Jorge-
6th January 2009, 17:28
Yeah I had the airbox out to give it a clean up and noticed it was missing something, what about the breather then? I see I need this to fit the kit:
http://img.photobucket.com/albums/v603/StreetDragster2/Saxo_Induction_Kit/Induction_03.jpg
But I am guessing that I also need a part that goes INSIDE the cam cover?
AlexB
6th January 2009, 17:32
yes you do mate
but citroen will try and make you buy a whole cover
iirc willsy found the same part elsewere on the motor
Jorge-
6th January 2009, 17:35
This is a pain..
What is that part called? (I am really untechnical you dont understand)
To fit the raceland, will I have to remove that air pump? What will be repercussions be of this? and will I need to bung up where I took it from?
AlexB
6th January 2009, 17:38
i dunno the name of that part mate
the air pump might be in the way
the only but you need to plug up it the side of the head where the pipe goes in
its there for emissions purposes but makes very little difference in them
willsy
6th January 2009, 18:30
Bloody ell ive posted up the part numbers and prices for the bit that can be used to replace the missing part about 3 times this week lol
Ill find it again. Gimme 10 mins and ill pop it at the end of this post for you
Jorge-
6th January 2009, 18:32
Thankyou! :D
willsy
6th January 2009, 18:37
The part number is: 1192 N2 and is described as RECYCL END PIPE £10.82
voila!
Not cheap but its exactly the same size etc and saves you paying £70 or whatever it is that citroen tell you you need to pay for a full new cam cover (thieving gits)
Jorge-
6th January 2009, 19:21
I have a man on the inside, well a guy who does cheap OEM parts, got the full exhaust fitting kit and mounts for £14 posted, Kam racing was about £30!
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.