Log in

View Full Version : Vts starting problems

michaelw6
21st January 2009, 20:36
ive noticed that when ive been starting my car recently it sounds like the battery is dyeing but i know its not, then today i drive to work only to find when its time to come home it wont start. just a click.
immobiliser is fine and the click seams to be coming from the starting motor?
is this a common thing to go wrong where can i get a secondhand one and how hard is it to replace?
or is it just easyer to take it to a garage?
cheers mike.
jasonfitness
21st January 2009, 20:41
ive noticed that when ive been starting my car recently it sounds like the battery is dyeing but i know its not, then today i drive to work only to find when its time to come home it wont start. just a click.
immobiliser is fine and the click seams to be coming from the starting motor?
is this a common thing to go wrong where can i get a secondhand one and how hard is it to replace?
or is it just easyer to take it to a garage?
cheers mike.


Starter Motor is bolted to the back of the engine with a couple of cables to it. It's easy enough to do, can be a bit awkward to get to though if i remember.
michaelw6
22nd January 2009, 17:26
gonna attempt to remove it sat morning then off to highworth breakers to see if they got one.
Anyone wanna give me a push...LOL
michaelw6
24th January 2009, 10:39
cant find the starting motor please help?
shakey1987
24th January 2009, 10:43
its on the back of the box follow the thick red wire from battery it goews down to the starter cant miss it that way
shakey1987
24th January 2009, 10:43
3 bolts to hold it in should be easy m8
michaelw6
24th January 2009, 11:13
Think i can see it from under neith dont look easy from here?
can only see one bolt.
if i got to get at it from top looks like i got to strip it down to get to it???
anyone taken one out a vts 1998 mk1 let me know if its easy or im gonna just wack hell out of it hoping it will last a bit longer.
shakey1987
24th January 2009, 11:16
u will have to move few little bits bit it shouldnt b hard
michaelw6
24th January 2009, 11:17
recon from top?
Ryan
24th January 2009, 11:29
you get to the starter from the top not underneath.

before removing it try tapping it with a mallet etc... as it usually sorts them.
michaelw6
24th January 2009, 19:21
Wacked it quite alot went slow then sped up and seems fine at the mo. see how it goes.
had to take all bits off the top to get to it looks like it would be fun to try and remove can only see two bolts.
see how it goes though. cheers for your help guys.