PDA

View Full Version : Fuel Pressure Regulator Type

raunchz
29th January 2009, 21:55
Am just after a favour - if anyone has a fuel pressure regulator that they could quickly measure I'd appreciate it!

Am looking to order a fuel pressure regulator housing to go with some throttle bodies, jenvey list 2 types:

Pressure regulator housing with -6 fittings. (9.4mm Bosch) RH01 £ 39.00
Pressure regulator housing with -6 fittings. (7.5mm Bosch) RH02 £ 39.00

Am just wandering if anyone can quickly measure the end of the fuel pressure regulator and tell me the diameter? 7.5mm or 9.4mm?

Much appreciated if someone can quickly do this for me !
willsy
29th January 2009, 22:14
Ive got one at home sitting in a box in my room. Ill have a look and measure it when i get back home
raunchz
29th January 2009, 22:22
Would really appreciate it Willsy - am just after the diameter of the end that fits into the fuel rail.

Top bloke!!!
gd16
29th January 2009, 22:33
Pressure regulator housing with -6 fittings. (9.4mm Bosch) RH01 £ 39.00
Pressure regulator housing with -6 fittings. (7.5mm Bosch) RH02 £ 39.00



Just to save confusion, you've listed -6 for both sizes. The top one is -6 and the bottom is -5.

Unfortunately not much use to you. (although i'm fairly certain the standard FPR is 8mm connectors - so -5, but get someone else to confirm)
raunchz
29th January 2009, 22:37
I think the -6 refers to the connectors on the remote fpr housing for the fiuel line fittings.

As I read it is that 7.4 n 9.5 I is the diameter inside this housing that the end of the fpr fits within. Could be wrong.
gd16
29th January 2009, 23:04
Sorry - probably not made myself clear.

-6 fitting can not be both 7.5 mm, and 9.4mm.


How to work out the "-" dash sizes;

1 inch = 2.56cm = 25.6mm

Divide by 16 = 1.6mm

Dash 6 ("-6") = 6 x 1.6 = 9.6mm
Dash 5 ("-5") = 5 x 1.6 = 8mm
etc etc
gd16
29th January 2009, 23:04
Wahey - double post :(
willsy
30th January 2009, 00:19
Right got the FPR infront of me.

Need to confirm which bit needs measuring from where as im looking at it with a confused face lol
raunchz
30th January 2009, 01:53
Sorry havnt posted sooner, it was the diameter of the part with a rubber o ring, the smaller one.Thanks
williamsvts
30th January 2009, 13:34
Sorry - probably not made myself clear.

-6 fitting can not be both 7.5 mm, and 9.4mm.


How to work out the "-" dash sizes;

1 inch = 2.56cm = 25.6mm

Divide by 16 = 1.6mm

Dash 6 ("-6") = 6 x 1.6 = 9.6mm
Dash 5 ("-5") = 5 x 1.6 = 8mm
etc etc

1" is 25.4mm btw :P or 2.54cm
raunchz
30th January 2009, 13:56
http://i196.photobucket.com/albums/aa257/raunchz/RegHo_l.jpg

As I read it The diameter I'm after is 'X'

Ideally am just looking to order the correct size fuel pressure regulator housing from Jenvey, as well as a sausage filter base plate.
raunchz
30th January 2009, 13:57
Sorry I missed your post last night Willsy - if you don't mind posting the diamter of the frp you've got that'd be great!