PDA

View Full Version : will this be an easy fit???

neo2001
8th February 2009, 02:13
will this engine be an easy fit into my vtr? also will the gearbox fit and soforth??

ebay.co.uk (http://cgi.ebay.co.uk/2004-CITROEN-XSARA-PICASSO-PEUGEOT-1800-16V-ENGINE_W0QQitemZ250370155184QQcmdZViewItemQQptZUK_ CarsParts_Vehicles_CarParts_SM?hash=item2503701551 84&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A7%7C39%3A1%7C240%3A1318)

thanks
tommy
TU-Tuning
8th February 2009, 02:20
no it wont mate, lots of fiddly custom bits will need fabricating which will be costly
neo2001
8th February 2009, 02:45
will it fit under the bonnet? or will i need to mod it to fit? and will the gearbox fit?
vlatko_vts
8th February 2009, 04:45
will this engine be an easy fit into my vtr? also will the gearbox fit and soforth??

ebay.co.uk (http://cgi.ebay.co.uk/2004-CITROEN-XSARA-PICASSO-PEUGEOT-1800-16V-ENGINE_W0QQitemZ250370155184QQcmdZViewItemQQptZUK_ CarsParts_Vehicles_CarParts_SM?hash=item2503701551 84&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A7%7C39%3A1%7C240%3A1318)

thanks
tommy

Is too much money for too much nothing. Better buy from Xsara Vts or Saxo-Vts engine. I think that with Saxo-vts engine you will not have a lot of problems with fitting. And you will get a lot of better performance than from Xsara-Vts. But that is my opinion. :drink:
Sparco_Tom
8th February 2009, 09:44
not worth the troubles of getting it in set up and running. Tuned vts would be much better and much lighter
evo189
8th February 2009, 19:46
to much troble you hae to cut the sus tops away and re weld.
AlexB
8th February 2009, 19:52
simple answer is it wont fit easy

most of the front of the car needs modifying to mount it aswell as custom driveshafts ect
saxokid100
8th February 2009, 19:57
will it fit under the bonnet? or will i need to mod it to fit? and will the gearbox fit?

Get your beam fixed firt dude!! then drop vts lump in........:y: