PDA

View Full Version : Pipe from throttle body??

Olly
22nd February 2009, 20:03
Have got a pipe coming out of the throttle body, just wondered what its for? http://s718.photobucket.com/albums/ww190/sax-oli/?action=view&current=Throttlebodyend.jpg
Olly
22nd February 2009, 20:03
http://s718.photobucket.com/albums/ww190/sax-oli/?action=view&current=Throttlebodyend.jpg
raunchz
22nd February 2009, 20:22
which pipe is it in the picture ?

One is the vaccum for the fuel pressure regulator, the other is the vacuum for the brake servo.
Olly
23rd February 2009, 07:36
the pipe coming out of the throttle body bottom by the white electrical plug with 90 degreee bend then goes down off bottom of pic.
Olly
23rd February 2009, 07:43
http://i718.photobucket.com/albums/ww190/sax-oli/unconnectedend.jpg
JamesR
23rd February 2009, 08:08
Air flow sensor is it??
Olly
23rd February 2009, 19:45
think it connects to the brake servo, well the one from my inlet manifold on the vtr goes to the servo, and theres no other pipe coming from it, so at a guess...
raunchz
23rd February 2009, 19:51
yeh, connects to the brake servo. The big black circular dome.
Olly
23rd February 2009, 20:00
yer kl whats it for? does it feer air to the servo or other way round? LOL i like to know what stuffs for :P
raunchz
23rd February 2009, 20:17
it helps the brake servo help you with braking - I would definatley connect it up !!
Olly
23rd February 2009, 20:20
haha yer will connect everything up when its put in :P just initially couldnt see the corresponding pipe on the vtr throttle body, its on the other end on the inlet manifold lol