Log in

View Full Version : lamda sensor


miss_murder
27th February 2009, 19:08
does any one know if you can buy a lamda sensor for a saxo vtr with a really long lead on it cheers

saxovtsmad
27th February 2009, 19:17
why do you need a really long lead thought they were standard lengths for appropriate vehicles

Juz
27th February 2009, 22:20
they come with a standard length on it, if you've fitted an aftermarket manifold just try re-routing the lambda sensor wires down the back of the gearbox instead. if they still don't reach you can just cut it off and splice in some longer wire to extend it.

richvtr88
27th February 2009, 22:28
they come with a standard length on it, if you've fitted an aftermarket manifold just try re-routing the lambda sensor wires down the back of the gearbox instead. if they still don't reach you can just cut it off and splice in some longer wire to extend it.

as stated gmc manifold is the manifold that needs the lamba sensor moved the furthest iirc.and as long as its routed the right way it does just about reach ok.u may just need to cable tie it up out the way of the driveshaft like i had to but no big deal