Not to sound like a complete chav

[LaurenceVTR]

But what is the loudest exhaust out there,
standard mani.
ss de cat pipe
as i've kinda realised if u want it out loud u need de-cat & i can't afford a mani for the moment so hat kind of backbox?
i'm guessing a uni jap can but there shite what is the loudest backbox for a saxo with that kinda setup?

cheers

[don55]

sorry

the loudest exhaust u can have is one like this, but i made it myself.


http://img.photobucket.com/albums/v127/donsax/DSCF4906.jpg?t=1240264285

[JamesR]

fuck off

Too much mate, i know the question is stupid but come on.


Go for a 4" backbox then, wont look too stupid and will be pretty loud.

[LEE_VTR1]

fuck off

uncalled for tbh don.


get anything piper or ashley they are loud enough

[LaurenceVTR]

fuck off

You fuck off...


isn't 4 inch a bit to big as i've seen around the forum that 2.5 inch is the best performance wise.

[Andybhoy]

who cares. if you dont like the question dont answer it.dont see what the problem is.

[JamesR]

You fuck off...


isn't 4 inch a bit to big as i've seen around the forum that 2.5 inch is the best performance wise.

You didnt mention performance you asked whats the loudes? 3" is good comprimise imo

[don55]

alright cunts, i edited it ok.

loudest u can get, sounded like an F1 car on my VTS lol.

http://img.photobucket.com/albums/v127/donsax/DSCF4894.jpg?t=1240264473

[Hpi_matrix]

Take off the exhaust and just run a manifold, that will be pretty dam loud :P

[LaurenceVTR]

You didnt mention performance you asked whats the loudes? 3" is good comprimise imo

Yeh fair enough. cheers man (y)

[JamesR]

Yeh fair enough. cheers man (y)

Need some of these :::::::::: mate not ()()()()()() these :y:

[don55]

fail lol

[Bean]

i got normal set up like you but i have a 3" rolled in but its called a muff diver lol dont ask me it came on the car but its loud as fuck!!!!! too loud imo you got a quieter one for swap? not standard mind!

found the link 4 one on ebay http://cgi.ebay.co.uk/CCR425-MUFF-DIVER-SLASH-CUT-STYLE_W0QQitemZ130066884195QQcmdZViewItemQQptZUK_C arsParts_Vehicles_CarParts_SM?hash=item13006688419 5&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318

[JamesR]

i got normal set up like you but i have a 3" rolled in but its called a muff diver lol dont ask me it came on the car but its loud as fuck!!!!! too loud imo you got a quieter one for swap? not standard mind!

Is it the cherrybomb D.I.V.E.R ?

[Bean]

Is it the cherrybomb D.I.V.E.R ?

nah m8 iv put the link up

[NICK2506]

Take off the exhaust and just run a manifold, that will be pretty dam loud :P

thats what i was thinking.

[JamesR]

thats what i was thinking.

You will get pulled left right and centre, and unless you where deaf i doubt you could stand it for long lol

[NICK2506]

You will get pulled left right and centre, and unless you where deaf i doubt you could stand it for long lol

I would never ever do it. But thats how you can get it loud :y:

[JamesR]

I would never ever do it. But thats how you can get it loud :y:

I know you wouldnt do it lol

I was jsut saying incase the thread starter thought it would be a good idea :D

In fact why leave the manifold on? take that off aswell :p

[NICK2506]

I know you wouldnt do it lol

I was jsut saying incase the thread starter thought it would be a good idea :D

In fact why leave the manifold on? take that off aswell :p

hahaha. :fcuk:

[JamesR]

hahaha. :fcuk:

Make your own manifold, that bends upwards through the bonnet, then goes into 4, five inch jap cans :homme:

[NICK2506]

:) or just have 4 scaffold pipes, 1 from each like single bit of the engine, and just run them down to the underneath of the car. ftw.

[JamesR]

:) or just have 4 scaffold pipes, 1 from each like single bit of the engine, and just run them down to the underneath of the car. ftw.

And since its for chavs, they can rob them off building sites, along with some builders foam to fit it with :fcuk:

[LaurenceVTR]

ha ye cheers i'll save myself some money and take the exhaust and mani off it, probs sell it for a bit of cash aswell
maybe not would be fucking loud but i'd get pulled everywhere i went and i dont need the hassle.
anyone got a vid of a piper backbox with an ss decat or any de cat, cheers

[tom130691]

:) or just have 4 scaffold pipes, 1 from each like single bit of the engine, and just run them down to the underneath of the car. ftw.

just robb the engine from the top gear food blender that was loud

[ben_glen]

hmmm, i've no idea if this would actually work, but on your Mani you have a lambada sensor yes? on the other side theirs a Bolt, could you get a small hole drilled through the bolt and have it still in? by small i mean around 3-4mm.. because mine came out once, and fook me was my car loud, but had no power at all...

like i said, no idea if it'd work

[LaurenceVTR]

cba fiderling around to much but could work, u'd still loose power tho

[JamesR]

cba fiderling around to much but could work, u'd still loose power tho

Could get the Supersprint system but with the magnum backbox? i think its about 4" or something.

[Hpi_matrix]

exhaust missing to loud for ya! Just remove the backbox! Or drill loads of holes in it :P

[Vtr_Alex]

Ive got a 4'' ashley on my vtr and its not load at all really. just right in my opinion ashley are load if you've got a full system with de-cat, same with most systems really.

[JamesR]

exhaust missing to loud for ya! Just remove the backbox! Or drill loads of holes in it :P

Loss in power will be bad lol

[Proffitt]

Get a full supersprint race system...mine is loud and is very good for performance :D

[titchster]

^What he said. Sell yours, and get a 2" Supersprint.

[gouldy87]

scafolding pole

[LaurenceVTR]

Get a full supersprint race system...mine is loud and is very good for performance :D

Have you got the ss mani + yours is a 16v vtr which i'm guessing would make a difference.

think i'm gonna buy a full ss system and see how that goes and if its not loud enough just get a magnex 4 inch backbox

[JamesR]

Have you got the ss mani + yours is a 16v vtr which i'm guessing would make a difference.

think i'm gonna buy a full ss system and see how that goes and if its not loud enough just get a magnex 4 inch backbox

They dont do a 16V VTR in this country :S

He means he has a VTR with a VTS engine conversion.

[DOYLEVTR]

i have supersprint centre secion magnex decat and sportex 3.5" back box and thats well loud. pops like a bitch too but can get annoying as fook on the m-way.

[saxo_90]

like i have said many times before ....... cherrybomb it if you dont mind getting the worst looks ever through little kids going deaf :P

[adamm]

I know you wouldnt do it lol

I was jsut saying incase the thread starter thought it would be a good idea :D

In fact why leave the manifold on? take that off aswell :p

my mates mini done this well it fell of and sounded like a tractor it was stupidly loud and thts only a 1.3 lol

[LaurenceVTR]

They dont do a 16V VTR in this country :S

He means he has a VTR with a VTS engine conversion.

I knew that, but he calls it a 16v vtr not a vtr with a vts engine.. lol

what i was saying, seeing as the vts engine is different(better) would it not be making a louder noise?

[JamesR]

my mates mini done this well it fell of and sounded like a tractor it was stupidly loud and thts only a 1.3 lol

The emmisions would be insane aswell lol