View Full Version : Engine Flush
SteveWC
3rd June 2009, 19:28
Right now I used the search button but I have a number of queries about this...
A) How much is needed to flush engine when changing oil? Just a bit or pour the whole bottle in?
B) I take it I use standard engine flush to do the gearbox also?
C) How much do I use for the gearbox?
and D) what brand shoud I use? Does it matter or do they all do the same thing?
Thanks!
andywiddss1
3rd June 2009, 19:51
dont use engine flush in the engine or the gearbox will never be the same again
AlexGreen
3rd June 2009, 20:44
dont use engine flush in the engine or the gearbox will never be the same again
Why?
I use the forte range of flushes on every oil change.
My dad owns a garage and uses it on most cars which come in for a service.
SteveWC
3rd June 2009, 20:58
dont use engine flush in the engine or the gearbox will never be the same again
Is that anything to do with leaks etc.? As I read something about engines leaking after being flushed.
Mieran
3rd June 2009, 21:00
I would drain the oil, use some cheap oil and run it for a short while then drain that and replace with good quality oil.
smokinjones
3rd June 2009, 21:02
warm it up, change the oil + filter
jobs a good un
don55
3rd June 2009, 21:03
just use hot water mate:y:
don55
3rd June 2009, 21:03
warm it up, change the oil + filter
jobs a good un
yup:y:
I would drain the oil, use some cheap oil and run it for a short while then drain that and replace with good quality oil.
this is what im doing on the new engine, got 5 litres for £12 which will do the trick for a couple of hundred miles then put some good stuff in
smokinjones
3rd June 2009, 21:06
this is what im doing on the new engine, got 5 litres for £12 which will do the trick for a couple of hundred miles then put some good stuff in
why????
ive ran out of money for my conversion mainly, but figured it cant hurt.
andywiddss1
3rd June 2009, 21:13
Why?
I use the forte range of flushes on every oil change.
My dad owns a garage and uses it on most cars which come in for a service.
on no service book any were as far as i know does it say put engine flush in at a service, in fact in any service book it will never tell u to put engine flush in .tottal stupid idea to put it in ,if u want to clean the oil ways and sump out ect put fresh oil in do a few 100 miles then drain it out and put new stuff in ;)
smokinjones
3rd June 2009, 21:14
credit crunch oil it is then lol.
AlexGreen
3rd June 2009, 21:18
Very mixed opinions. I saw a thread on cliosport and they were all praising it.
Here is a different story though.
Mieran
3rd June 2009, 21:22
The reason flush is bad for your engine is because it takes all the lubrication of internal parts.
I saw a thread on cliosport and they were all praising it.
They're all n00bs.
SteveWC
3rd June 2009, 21:22
I saw people on here praising it before too hmm bit confused about what to do now!
What do you mean by it will never be the same?
SteveWC
3rd June 2009, 21:23
just use hot water mate:y:
As far as I know you should never put water inside an engine?
Mieran
3rd June 2009, 21:24
As far as I know you should never put water inside an engine?
He was being sarcastic. :homme:
andywiddss1
3rd June 2009, 21:28
I saw people on here praising it before too hmm bit confused about what to do now!
What do you mean by it will never be the same?
it will not do ur engine any good it washes all of the goodness out of ur engine and the film that putting good oil in ur engine coats all the parts will be washed away :wall:
if u wanna put engine flush in up to u fella ,if it was that good it would say in all service books use engine flush and it dosent :fcuk:
don55
3rd June 2009, 21:43
As far as I know you should never put water inside an engine?
you think :panic:
lol it was a joke:homme:
SteveWC
3rd June 2009, 22:05
Alright so I havent got money to spend on another 4 litres of oil tbh so Ill just get the current stuff nice n warm then do a straight swap
Cheers for info :y:
smokinjones
3rd June 2009, 22:45
good man!
Alot of engine flushes break down the oil so it becomes thinner at a lower temperature and breaked down hardened oil that block channels and holes! While its doing this there is still oil running through the engine so it will still be protected on idle, just not at any speed or load! The oil is also easier to drain than just warm oil, so there is less left in the engine to contaminate the new oil! :y:
A large amount of engine builders and mechanic use products like these everyday! I really doubt professionals would use these products if they where detrimental to engines! Also doubt the market for products like these would be as big!
My two pence!
Not wanting a arguement just saying what i think! :afro:
SteveWC
4th June 2009, 09:11
:panic:
Engine flush...
good or bad!?
AlexGreen
4th June 2009, 09:39
qrty:clapping:
Riko360
4th June 2009, 12:09
i wouldnt bother tbh. i have used it on a previous car and yes it did feel better but the things you read about removing all build up of old oil from around the block could in theory unblock any small cracks that may be inside the engine and potentially make them worse quicker. dont hold me to this, this is just what i have read.
smokinjones
4th June 2009, 13:13
ring citroen, they made the car, they will know or at least can advise!
SteveWC
5th June 2009, 01:10
i wouldnt bother tbh. i have used it on a previous car and yes it did feel better but the things you read about removing all build up of old oil from around the block could in theory unblock any small cracks that may be inside the engine and potentially make them worse quicker. dont hold me to this, this is just what i have read.
Sounds resaonable
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.