rocker cover

[camTcar]

just wondering how to change the rocker cover, ive just recieved my new one, do i need to change any gaskets of anything else when i swap them??

[Hopey121]

is your existing cover split or damaged mate ?

to be honest they are only like £6 or sumthing so its easy to replace them.

firstly unplug the breather

All you do is take the two bolts of the top of the rocker cover think they are 10mm or 12mm

then lift the rocker cover of

the plate will be left on top of the valves with the two spaces on the holes
if its ont then it wil be stuck inside the rocker cover, all you do is pull it out then sit it on the valves and put the two spacers over the holes then put your new rocker cover on.


Hope this helps you :A:

[camTcar]

is your existing cover split or damaged mate ?

to be honest they are only like £6 or sumthing so its easy to replace them.

firstly unplug the breather

All you do is take the two bolts of the top of the rocker cover think they are 10mm or 12mm

then lift the rocker cover of

the plate will be left on top of the valves with the two spaces on the holes
if its ont then it wil be stuck inside the rocker cover, all you do is pull it out then sit it on the valves and put the two spacers over the holes then put your new rocker cover on.


Hope this helps you :A:

the rubber seal which surrounds the bottom of the rocker cover is split

[mrgris]

if you've got a silver top engine its sometimes easier to remove the coil pack aswell to give you more room.

slide old one off, slide new one on, very easy job:y: