PDA

View Full Version : vtr powerband

redsaxo22
24th June 2009, 14:55
have vtr 99 t plate. its nippy enough for me but it feels like the power only really kicks in at 3000 revs and pulls hard to the redline. are all vtr's like this? or is there maybe a problem? or am i goin nuts? :zainy:
bfc2dabone
24th June 2009, 15:00
thats sounds about right to me
Matt67
24th June 2009, 15:05
Should start to drop off before the redline - you don't want to be redlining anyway.

peek rpm is 7250 iirc? somewhere along those lines.
-Dan-
24th June 2009, 15:28
VTR only revs to 6250, so it won't be that high.

Peak torque on a VTR is about 3500 RPM IIRC, or did you mean redline, which is 6250?
Matt67
24th June 2009, 15:34
VTR only revs to 6250, so it won't be that high.

Peak torque on a VTR is about 3500 RPM IIRC, or did you mean redline, which is 6250?

Sorry typo. I meant like peek type to change gear.
AndySAXO
24th June 2009, 15:42
peak power is about 5,5k it will start dropping off after that, that if it total standard, you might have after market cams if it seem to still pull after that, also if the power dont come intil that late what say that maybe you got unrated camshaft, :P

Andy
redsaxo22
24th June 2009, 15:52
Should start to drop off before the redline - you don't want to be redlining anyway.

peek rpm is 7250 iirc? somewhere along those lines.

i never redline as thats a quick way to destroy an engine. i never go above 5500.

its not had a service in a while so thats somethin i'm gonna do tomorrow.

i dont think its had cams done. cheers for help guys. :y:
maddison_vts
24th June 2009, 16:57
i never redline as thats a quick way to destroy an engine. i never go above 5500.


the power only really kicks in at 3000 revs and pulls hard to the redline.


hmmmmmmmmm, i think your getting confused.:zainy:
DanT
24th June 2009, 17:21
hmmmmmmmmm, i think your getting confused.:zainy:

LOL true.

Install breathing mods.
-Dan-
24th June 2009, 17:45
Completely off topic but DanT, do you realise your avatar is actually incorrect. Instead of a VTEC in the S2000 he had the Nissan SR20 Engine in there.

Your avatar is lies!

If you don't believe me:

http://www.imdb.com/title/tt0232500/quotes

3rd or 4th quote down. :wink:
miamibluebaby
24th June 2009, 20:09
Completely off topic but DanT, do you realise your avatar is actually incorrect. Instead of a VTEC in the S2000 he had the Nissan SR20 Engine in there.

Your avatar is lies!

If you don't believe me:

http://www.imdb.com/title/tt0232500/quotes

3rd or 4th quote down. :wink:

^^^^ haha lol

any ways the rallye that i had was cammed and power only realy came on at around 4000/4500 rpm then would pull to almost 7400 rpm redline was nippy made a show of my mates gti:y:
redsaxo22
24th June 2009, 20:22
ooooppsss. :oops: i realise my faux pas. what i was meaning is that i've took it to the redline and not above it. so that would be 6250. my bad.