Engine Conversion question

[tkdellis]

Ive got a 2003 plate vtr 3 plug ecu and im putting in a 1998 single plug ecu Vts engine what problems am i going to come across because the only thing im not looking forward to doing is the engine loom and putting in a return fuel line and also how do i get the single plug engine loom to fit the 3 plug car loom

[silversaxo113]

dont do it just get a 3plug vts....has anyone actually put a single plug engine into a car with a current 3plug loom succesfully?

[LeeM]

ive got a single plug engine in a 3 plug car, but mines a later loom and it still isnt 100% as my dials dont work
a 98 loom will need the ends cutting off and each individual wire matching and joining, get rid and get a 3 plug loom

[silversaxo113]

ive got a single plug engine in a 3 plug car, but mines a later loom and it still isnt 100% as my dials dont work
a 98 loom will need the ends cutting off and each individual wire matching and joining, get rid and get a 3 plug loom

do you know of any1 going the other way 1 plug to a 3plug ? i know its of topic but just intrested in this lol:P

[LeeM]

tbh nything can be done with the time nd effort.
if you had an early mk2 vtr it could have a single plug ecu but a big mutliplug where the engine loom meets the car loom. in that case a 3 plug vts engine would fit. there are complications with this though

[tkdellis]

do you recon i could get some wiring diagrams and wire the single plug engine loom to my car loom and you recon that would work

i do wire on cars as my job so i would prefer to try that first

[kenny]

easiest way to do this is geta 3 plug loom and engine instead of messing around going from 3 plug to single. As Lee said the loom will need altered to be succesful in all electrics working (dials and such)

[LeeM]

just swap your 3 plug loom and ecu for a single plug one. i'd swap you because im after a 3 plug but my loom has the same multiplug as yours.
if you get hold of a single plug one though i'll buy your current ecu and loom :)

[tkdellis]

i no what your saying but if i can just get the pin out diagrams for the single plug loom connector between engine and car loom and the same for the 3 plug ecu engine to car loom then it should be easy enough to just de and re-pin them to fit my car. all i need is the connector pin diagrams for the connector on both looms if anyone can help!?!


or if anyone has a 3 plug engine loom and ecu out of a vts i would by that
if not im gonna try and make the single plug engine loom and ecu fit my car loom :wall:

[LeeM]

theres different things though. my single plug loom has some sensors that go to the ecu and then back to the clocks, on a 3 plug the same sensors go straight to the dash without going via the ecu

[tkdellis]

cant i just run them sensors to the ecu and then take a feed off them and run them to the back of the clock :panic:

so if i do the wiring and the engine all works i wont have anything working on the clocks :bash:

[LeeM]

sounds like far far too much hassel to me that, just look out for someone who needs a 3 plug ecu and loom, plenty of people posting in wanted section

[tkdellis]

so you recon it would be better to buy a 3 plug engine loom and ecu but will that work with the engine :wall: