106 Loom Splice

[KrisB]

Hi guys, i'm doing a 106 xsi 16v conversion for a customer. Is there anybody on here able to come and splice the loom for me? I will pay. I'm located in horsham, west sussex.

[KrisB]

I'm trying to have a go myself here, these are my findings which are somewhat confusing, i will post them here to help me aswell.

16v loom. Working from top left... to the right.

1. green
2. pink
3. white

4. green
5. orange
6. grey
7. yellow
8. blue (thicker)

9. green
10. orange
11. pin but no wire?!
blank
12. cream
blank

13. green (plus yellow dots)
14. cream
15. yellow
16. pink
17. cream

18. white (thicker)
blank
19.pink
blank

1.6 8v plug

1.green
2. pink
3. white

4. grey
5. orange
6. grey
7. yellow
8. blue (thicker)

blank
9. yellow
10. pink
11. white
12. blue
13. earth (thicker)

blank
blank
14. cream
15. yellow
blank

16. white (thicker)
17. purple
18. brown
blank

I truely cannot understand wtf is going on here, also how it seems that the guides i've been foollowing on 106owners have the numbering numbering from left to right and then down. Yet the plugs have numbers on them which go from right to left.

Please someone help me, this is really starting to piss me right off, when i'm pissed off get an a rage and usually smash up something close, i dont really want this to happen to bens car.

Or if anyone wants to come and do it for me then i will pay them!!!

[AlexB]

theres a guide on rallye register

http://www.106rallyeforum.com/forum2008/showthread.php?t=36056&highlight=s1+16v+wiring

[KrisB]

Cheers, that seems to be irrelivant to me and too much hassle as the looms have both been labeled up and cut now. Really am getting so ticked off with this now.

If i got an interior loom would it make things easier? The car is fully stripped inside anyway so it'll be a peice of cake to swap, is it then a case of plug+play?

[AlexB]

you can swap the interior looms yes but there may be differences in the plugs fr the dash and things dependant on what engine loom you have at the moment