PDA

View Full Version : Extra perforance WANTED ???

DAZ1985
18th January 2006, 19:22
98bhp Saxo VTR already got piper x viper and a 4branch manifold. Exhaust coming soon which 1 i dont know so abit of help their as well wouldnt go a miss. But what else can i do to get extra BHP, Without turbos, chargers or throttle bodies. Best BHP increase for the money ????
b0t13
18th January 2006, 19:44
cat-bypass maybe?

cheap and effective but youll fail MOT with it on..
DAZ1985
18th January 2006, 20:25
cat was on the manifold so its de-cat already any exhaust tips ??
abps magnex single box system or powerflow ?????
Scott
18th January 2006, 20:36
magnex.

Cam and remap. Have a little search of the forums loads of handy threads like this to smileys/happy.gif
DAZ1985
18th January 2006, 20:43
best places for cams and re-map any recomendations ???
Sean
18th January 2006, 21:21
catcam 708's from QEP. not sure if they can re-map, if not then either a Dastek or a re-map of the standard ecu by Wayne at Chipwizards (contact Jamsport).
Dan
19th January 2006, 01:12
Dito on what sean said. smileys/smiley2.gif
hesslevtr
19th January 2006, 05:58
also strip it
spencer_cammedvts
19th January 2006, 13:28
get a pug 106 rallye s1 manifold. you can get em for £50 ish off ebay with throttle body & fuel rail!

great bit of kit!
DAZ1985
19th January 2006, 21:49
wot can i rid but keepin all the seats in?
dont think s1 rallye inlet manifold fit on my car
b0t13
19th January 2006, 22:35
remove the steering wheel, heavy pedals, doors and wheels

this will remove alot of weight but you wont get far without them ;)

try replacing stuff with carbon fibre like the bonnet or something...
RIBstaff
19th January 2006, 23:53
I would advise you to start off and get a green enclosed or bmc ind kit(EITHER AS BOTH ARE RATED JUST AS GOOD AS EACH OTHER), Now a full scorpion decatted system (OR SS,MAGNEX,JANSPEED),followed by a supersprint 4-2-1 manifold (OR GMC) Now I would get some headwork done by a well known garage(JAMSPORT ex) port,polish and skimmed (SKIMMED IS NOT COMPULSARY)and now a catcam708(RESEARCH FOR OTHERS) at the same time i would have a re-map done again by(JAMSPORT) but there is a cheaper route ie the dastek unichip which is a piggy back ecu, and to finish her off ild strip it then race it(TRACK)
DAZ1985
20th January 2006, 04:53
Wot is the best thing if i got a tight budget ?
Dan
20th January 2006, 05:15
How much do you have to spend?

Full system with de-cat will be £300+
Re-map or dastek will be £400+
Cams will be £400+
Head work £200+

Stripping is free, if you want to keep the rear seats then take the spare wheel off, boot carpet, parcel shelf and anything in the boot, would be best if you took the rears out though.
DAZ1985
20th January 2006, 05:38
300 quid after iv got the exhaust
cheers 4the weight tip
RIBstaff
20th January 2006, 22:46
one of the best and cheapest mods smileys/smiley2.gif