Engine Tune

[kris_snooks]

How Much And Where Could I Get These Parts? Also What Bhp Figures Would I Be Seeing Roughly?

Throttle Bodies
Fast Road Camshaft Kit
Gas Flowed Head
Full Exhaust System (Manifold Back)
Remap

[saxo_asa]

Depends what make you go for...theres loads of threads about this kind of stuff. try using the search thing

[kris_snooks]

Anyone Had It Done?
Has Anyone Had It Done By Pug1Off?

[kris_snooks]

Well I Wanted People To Recommend Parts Really

[Paul]

Dont jump in at the deep end mate.

I see your driving a VTR, a 16V + breathing mods should be good to start you off.

[makaveli144]

How Much And Where Could I Get These Parts? Also What Bhp Figures Would I Be Seeing Roughly?

Throttle Bodies
Fast Road Camshaft Kit
Gas Flowed Head
Full Exhaust System (Manifold Back)
Remap

On a 8v or 16v?

Im making 160ish bhp and a lot of noise with all the mods you have listed above. You will need a standalone ecu though not a remap.

[kris_snooks]

Its An 8v. I Want To Stay With The 8v For Now, Can I Buy A Unlocked ECU Or Do i Have To Get An ECU And Have It Unlocked? If I Can Just Buy An Unlocked ECU Where And Whats Best Make? (Link To A Site)

[kris_snooks]

Actually Just Thought I May Aswel Buy A Vts Engine If Im Going To Do All These Mods, I Still Want To Do All These Mods But To Vts, (Still Same Question AS What Asked At First But On A Vts Instead).

[makaveli144]

Its An 8v. I Want To Stay With The 8v For Now, Can I Buy A Unlocked ECU Or Do i Have To Get An ECU And Have It Unlocked? If I Can Just Buy An Unlocked ECU Where And Whats Best Make? (Link To A Site)

You cant run standard ecu end of. You need something like KMS,Predator,Omex.

Actually Just Thought I May Aswel Buy A Vts Engine If Im Going To Do All These Mods, I Still Want To Do All These Mods But To Vts, (Still Same Question AS What Asked At First But On A Vts Instead).

Throttle bodies-jenvey/kms/atpower
Cams-piper 285,cat cams 708s, kent pt51s
Headwork-QEP

You do realise its not cheap and costs thousands?

[kris_snooks]

Yea I Do Realise Its Not Cheap But Im Not Going To Be Doing It all At Once, Unless I Take A Loan Out (Thinks Good Idea). Are There Any Websites I Could Get The Parts Off?

[titchster]

You cant run standard ecu end of. You need something like KMS,Predator,Omex.

Chipwizards can map standard ECU for bodies...

[AXracing]

How Much And Where Could I Get These Parts? Also What Bhp Figures Would I Be Seeing Roughly?

Throttle Bodies
Fast Road Camshaft Kit
Gas Flowed Head
Full Exhaust System (Manifold Back)
Remap

How long is a bit of string and how much do you wish to spend? You can spend a little as £200 on a ported head or over £2000. Fast road cams vary massively depending on the actual spec. Reall you could spend as much as you want and the more you spend the more power, reliability and usability you will get.

Chipwizards can map standard ECU for bodies...

I would not bother though. It costs a lot and the standard ECU is very dated these days. There also a one shot deal and if you wish to change anything again it costs a lot to map again. Especially when you consider you can get a stand alone ECU and get it mapped for less then a price to map the stock one.

[titchster]

True, I understand that the OE ECU is dated, but the point I was making is that it can be done on it. And one thing to consider is that although it costs more to get the OE ECU mapped, you don't have the cost to buy it in the first place.

[AXracing]

Give Andy a PM for a good price on fitted and fully mapped stand alone ECUs http://www.saxperience.com/forum/private.php?do=newpm&u=20603

[KamRacing]

to get the head done by someone really good costs a fair amount. There is only one person in the UK I'd let loose on mine.

When you start specing up the engine its worth thinking about what you want to do in the future with it. Not worth putting in a mild cam if you want to further improve power down the line for example

[Olly]

Think you need to have a search around, there is lots of threads on each one. Read up on how they work and what complements them and build your spec up from there,

GMC Motorsport Can supply most thigs you need,
QEP Also
Pugsport

There is loads of individual companies, The best option isnt always the cheapest im afraid....

May need to considder alot of other things too....