Air Filter Question

[Ramsay]

hi i have 4 inputs to my Air Filter i see induction kits with 2 inputs all the time and was wondering what connections i need or do i need all of them
heres a pic to help :D
http://i560.photobucket.com/albums/ss43/Ramsay2009/DSC009231.jpg
the connections are numbered so if someon could tell me what ones i need

[Ramsay]

Numbers 4 and 2 go to the other side of the throttle body ??

[Ramsay]

any1 ?

[MR_N]

Same as mine mate, (older engine type).
Number 1 -Air temp sensor, that should be connected to the air filter piping before it enters the throttle body

Number 2 - Goes to your idle control valve (icv) You can put a breather on this but ive got mine put into the air filter piping aswell

Number 3 -Should connect to the rocker. (oil breather pipe). Its fine to put a breather filter on the end of this or connect the pipe to an oil catch tank.

Number 4 - should go under the throttle body to the other side of the throttle body. I believe this is their to aid the enigne breathe with the idle valve, just in case the idle valve goes this is alwas sucking air to the enigne to keep it running. This is on a breather filter on my engine aswell.

In recap - 1&2 connect to the induction kit.

-3&4 are fine to have breather filters on the end of them

Thanks is to the right >

Regards

Sam