PDA

View Full Version : CAMS!!!???? 16v


GingeVTS
15th September 2009, 19:21
if i was to only put cams on n a remap which cams to go for, value for money??

Ryan
15th September 2009, 19:22
depends if you plan to go further.

catcam 708s, or newmans ph3s seem to be the popular ones

GingeVTS
15th September 2009, 19:23
might go further but if not what power would i expect to get??

Ryan
15th September 2009, 19:25
depends how dodgy the rollers are and whos mapping it.

708s and wayne expect 153/7bhp :D

GingeVTS
15th September 2009, 19:26
well actuall iv got a 4-2-1, decat, pipercross filter forgot about them lol

GingeVTS
15th September 2009, 19:30
and i believe these vts's beat them subaru's is that true???

Chr15
15th September 2009, 19:36
Subaru 360's, yes.

Ryan
15th September 2009, 19:37
and i believe these vts's beat them subaru's is that true???

lol...

GingeVTS
15th September 2009, 19:38
360's??

KamRacing
15th September 2009, 19:39
and i believe these vts's beat them subaru's is that true???

no. Might need to give yourself a pinch lol


early to mid 150s would be my estimate for the 708s

We used to have a 180bhp 205 gti and even that got spanked on a standing start by scoobs

blackie_2k5
15th September 2009, 19:41
my mates building a hi spec 205 gti atm

GingeVTS
15th September 2009, 19:46
well my mates got a standard sti we wer out in it couple of days ago n this black vts flew past anyway set of lights apeared bit of spin off the saxo at first but it just left us for a laugh....

Chr15
15th September 2009, 19:48
360's??

Subaru 360

http://www.autosphere.ru/images/stories/image8/Subaru%20360.jpg

GingeVTS
15th September 2009, 19:50
Subaru 360

http://www.autosphere.ru/images/stories/image8/Subaru%20360.jpg

well i could probably run faster than that lol

blackie_2k5
15th September 2009, 19:51
so if it beat you y are you asking if the vts are faster lmao

GingeVTS
15th September 2009, 19:52
well dont know what exactly he has got under the bonnet
what would it take to get it faster than a sub?

blackie_2k5
15th September 2009, 19:53
faster? or quicker

GingeVTS
15th September 2009, 19:55
well whats the difference?

blackie_2k5
15th September 2009, 19:58
lmao, faster is how fast it goes, quicker is how quick it gets there

Ryan
15th September 2009, 19:59
to be faster than a well driven performance car = alot of money :D

To be faster than a badly driven car = how much are driving lessons?

GingeVTS
15th September 2009, 20:00
well quicker then, obiously a sub is guna be faster top end

GingeVTS
15th September 2009, 20:01
so what am i gunna need then

blackie_2k5
15th September 2009, 20:01
my point exactly, bascically alot of money

KamRacing
15th September 2009, 20:06
so what am i gunna need then

a lot of talent

or a lot of money

the majority rarely have both :p

GingeVTS
15th September 2009, 20:09
talent is my uncle

n money is my dad
i best get beggin lol

saxo_ron
15th September 2009, 20:13
Dont know a great deal about scoobys but uk spec turbo models dont seem to be that quick when they are on the go already but off the start with 4wd they should be eating saxos

Xsi16v_Jk
15th September 2009, 20:18
haha loving the subaru360 ;)

Stick to 708s bud, or newmansph3

GingeVTS
15th September 2009, 20:19
it did pull off the line but second gear let it down the saxo dominated it

GingeVTS
15th September 2009, 20:20
ill have to have a look at these 708's

saxo_ron
15th September 2009, 20:21
708's and newmans ph3 are similar

GingeVTS
15th September 2009, 20:40
which one's would you recomend

AndySAXO
15th September 2009, 20:54
i would say PH3 but that becasue i have Ph3 in my saxo at the moment, like they said both very much the same in spec,

Ph3 are alittle cheaper at the moment aswell!!

also on a good dyno dont expected much more that 145!!

well i talk to a few well repected mappers who mapped saxo and 106 alot, they say 708 and PH3 will be around 140 -145!!

also would say look at getting new followers when changing camshafts!

andy

McPikie
16th September 2009, 11:28
Stripp ALL excess weight out for a difference. Spare wheel, back seats etc etc. Decent suspension and brakes so you can corner quicker and brake later. Would help in a "street off" at the lights, lol

Final point.......... RUBBER

your tyres are the last point of contact between the drivetrain and the road. This is an area not to be skimped on. Depending where your driving and depends on what conditions determins what type of tyre you go for.

The Hancook RS2's are supposed to be a good bit of rubber

AndySAXO
16th September 2009, 12:12
Stripp ALL excess weight out for a difference. Spare wheel, back seats etc etc. Decent suspension and brakes so you can corner quicker and brake later. Would help in a "street off" at the lights, lol

Final point.......... RUBBER

your tyres are the last point of contact between the drivetrain and the road. This is an area not to be skimped on. Depending where your driving and depends on what conditions determins what type of tyre you go for.

The Hancook RS2's are supposed to be a good bit of rubber

bit off topic!!!

he did asked about cams!!! lol

GingeVTS
16th September 2009, 13:30
Thanks for the comments

these are all good points that need to be taken into account when making a car faster,
I have a problem with lo profile tyres tho what profile are the best to go for

McPikie
17th September 2009, 07:48
Thanks for the comments

these are all good points that need to be taken into account when making a car faster,
I have a problem with lo profile tyres tho what profile are the best to go for

Why do you have a prblem with them? Are you allergic to low profiles?

gavbey
22nd October 2009, 13:44
Why do you have a prblem with them? Are you allergic to low profiles?

hahahaha

rwillis89
22nd October 2009, 14:38
mine has beat a gd few scoobs:y: