PDA

View Full Version : INDUCTION KIT GUIDE


soldier
30th January 2006, 04:00
OK heres the deal.i have a citroen saxo 1.4 furio and at the moment its still standard.i was thinkin about putting an induction kit.just wonderin wot the best induction kit is for my car and how much will the performance increase and how much fuel consumption will i loose.

i do like the bmc induction kit but its pricey these manufactures are suckin our money

thanks
p.s.im 17 at college hence pricey

hesslevtr
30th January 2006, 04:07
if you want performance get an enclosed bmc etc

for noise go for a k&n etc

your not gonna see that much performance from just an induction kit

Dan
30th January 2006, 04:20
Agree with paul, bmc for performance but piperx or k&n for noise.

Scott
30th January 2006, 04:36
an induction kit on its own wont increase fuel consumption, the person behind the hweel with a heavy right foot changes that

spencer_cammedvts
30th January 2006, 18:23
agree with scott there and also if you want a balance of both performance and sound then take your filter towards the front of the car infront of the battery with some hosing i.e. samco, sfs

it may not have the edge on an enclosed but it keeps it away from the engine heat and heat blowing back off the manifold!

you'll see there is quite a big gap at the side of your radiator that cold air rushes in through and also the original induction feed can be modded to point straight at the filter. cheaper than buying an enclosed too!

you can get all the bits inc filter for about £100-£110