where would i look to find these?

[jeffchiz]

as title says i need help finding trumpets and socks to fit on my zzr600cc carbs and im told i need a distributor and leads to run these off and where can i find ones that will work with my vtr? im pretty clueless when it comes to bike carbs lol any help is highly appreciated

[swampy]

Your probably best off with a pipercross universal base and filter.
Basicaly a long metal plate that you cut four holes in, one for each tb and then a single filter goes over top.
Any pipercross dealer cam get them

[AXracing]

Dizzy you can get off any of the carb AX or carb 106s. You also have to get the alloy block its mounted to and coil. Personally I would just a ignition only ECU if I was you as there massively superior.

[Sparco_Tom]

get the trumpets from a zxr600, or a yammy r6. they are just the rubber trumpets which press into the top. then use a pipecross bike filter. like this
http://i187.photobucket.com/albums/x109/sparco_tom/n569455713_4792724_2458.jpg

[blackie_2k5]

would be better off stripping the set up and running diff bodies lol

[jeffchiz]

Your probably best off with a pipercross universal base and filter.
Basicaly a long metal plate that you cut four holes in, one for each tb and then a single filter goes over top.
Any pipercross dealer cam get them

cool cheers mate ill talk to them about it

Dizzy you can get off any of the carb AX or carb 106s. You also have to get the alloy block its mounted to and coil. Personally I would just a ignition only ECU if I was you as there massively superior.

oh right cool so i just ask for a dizzy and coil for a carb'd 106? you got any links to a good ignition only ecu? sorry really dont know wat i'll be looking for lol and ive got a block/flat piece of metal to the right of the rocker cover/cylinder head a couple(ish) inches square which looks like some thing should be attached to it i think this is where i fit the dizzy to? i dont think the 16v engine have this i think its only 8v engines

get the trumpets from a zxr600, or a yammy r6. they are just the rubber trumpets which press into the top. then use a pipecross bike filter. like this
http://i187.photobucket.com/albums/x109/sparco_tom/n569455713_4792724_2458.jpg

cool im gonna do a search for the trumpets and filter! cheers for the help :y:

would be better off stripping the set up and running diff bodies lol

erm.... no i have these carbs to hand so these one are getting used if the worst happens and i give up on then ill just sell them and get a rallye inlet