Driveshafts

[SaxoJay1409]

i have a west coast and the drivers driveshaft is knocking when i turn left , well i thinks its the driveshaft anyway , but i have a VTR for spares that is lowered and was thinkin of using the driveshafts off that but changing the complete sus leg as well is this an easy or hard job as i have no idea , any comments would be appreciated thanks

[Predator_R32]

You may be best buying a haynes manual if your going to do it

[TU-Tuning]

Yeah easy enough mate, once the pinch bolts undone and the wishbones brought down and out along with the shaft, all you need to remove is the droplink, the brake hoses and undo the topmount from above and the whole lot with come out with a bit of slight persuasion. Then just swap the brakes across and your sorted.

[megslad]

easy if you know what your doing mechanically

[Beenie]

they're pretty straight forward took me 15-20mins for the inner considering I'd never done them on a saxo before.