vacume pipe

[banke]

hi all

im in the middle of a turbo conversion and im stuk on wher the vacume pipe is, its for the pipes comeing off my dumpvalve and wastegate , , , any ideas ?

[blackie_2k5]

vacuum pipes are on the inlet mate.....and if you dont know that you really shouldnt be attempting a turbo conversion.....your gonna blow your car up imo

[banke]

wel iv sorted evrything out mate so im not doing to bad.

im just comfused about the pipes off the dump valve and wastegate

[blackie_2k5]

not trying to be funny in saying that mate but if you cant even fit a dump valve what are you gonna do about oil and water feed and returns etc let alone sorting out the fueling side of things and management, tricky busines and extremely easy to fuck it up and waste an engine and quite possibley if not probably a turbo

[Sophia_Bush]

you want to t piece it into the vac pipe that goes from the FPR to the inlet as that is right dia. iirc the way it was setup that would be ok for the gauge and dv then you have the feed going to wastegate

[banke]

its all sorted mate , turbo fitted , oil feed and return done , mf2\sigcon wired up , fuleing sorted all i need to know is what vacume pipe to T into

[banke]

you want to t piece it into the vac pipe that goes from the FPR to the inlet as that is right dia. iirc the way it was setup that would be ok for the gauge and dv then you have the feed going to wastegate

brent told me to run the guage off the feed comeing off the side of the turbo :panic: he told me to run it off this pipe.
http://i791.photobucket.com/albums/yy200/banke6118/100_0862.jpg

[Sophia_Bush]

I would go with whatever brent set it up as on his

[banke]

sound mate .. . .wher is the frp ???

[banke]

anybody know wher the fpr is located in the vts engine bay ??