sealing injectors

[Rob-C]

what is the best way to seal injectors and fuel rail? i got the o rings but still seems to leak a little?

[raunchz]

make sure where the injector seals fit against the plastic of the inlet is clean and free from debris, and the o rings aren't split etc.

I use a bit of spit to put on the o rings to help them slide in nicely :P

Been fine for me

[Rob-C]

hmm ok mate will give them another try

[williamsvts]

shouldnt need to put anything on to get them to seal.

[djadzvtr]

sorry for butting in but whilst your on the subject of injectors and stuff,,,where do i get a new set from (injectors) as my car is coming up with 'injector cylinder curcuit 2+3' when on the diognostic machine???

cheers

[Rob-C]

S injectors or R injectors mate?

[djadzvtr]

S injectors or R injectors mate?

sorry mate......'s' ones for a mk1 98' single plug if that makes a differance
cheers:y:

[Ste]

Where do you get the injector seals from?.

[Rob-C]

their just rubber O rings mate i got mine from a friend as he bought them forwhen he replaces his injectors but he sold them lol

[Rob-C]

i took the inlet manifold off and the injectors back off the car, cleaned the side of the head where the inlet manifold bolts to so it as a nice flat smooth surface, put a bit of grease round the rubber gaskets and bolted that on and done the same wih the injectors but made sure not o get it anywhere nearthe holes and fueling areas :)

[raunchz]

sealed all good now ?

[Rob-C]

seem all good now mate and also seems to start a lot better just like it used to :)

still sometimes turns over for a couple of seconds but start straight up now... don need to prime it a couple of times lol