conversion wireing :S

[Thunderbird]

doin a vts conversion as i speak and am currently fitting the loom its an 03 car and 03 engine and loom. iv got a few plugs and wires left over that i dnt have a clue what there for. the wires i have left, to wires that come off the loom nxt to the power steering relay which are brown and white, what looks lyk a o2sensor plug (do the late engines have an upstream and a dowstream?) and a two pin black plug that sits near the starter motor. if anyone knows please please help :)

[raunchz]

anychance of postings up some pics of them just to confirm ? They sound like they are the following:

- 2 black pin plug could be knock sensor? On the back of the block under the inlet?
- Yes, lat engine have a lambda sensor either side of the CAT to check its working
- Brown and white could be front radiator fan? Not sure about these tbh

[Thunderbird]

i thought that the sensor above the oil filter was the knock sensor :S and are the vts rad fans two speed?

[raunchz]

i thought that the sensor above the oil filter was the knock sensor :S and are the vts rad fans two speed?

above the oil filter is the oil level sensor - the knock sensor is on the back of the block

I'm just guessing at the brown and white wires, they don't ring a bell - a pic would help to identify them.

[Thunderbird]

http://www.facebook.com/album.php?aid=2031153&id=1303317764&saved#/photo.php?pid=30833657&id=1303317764

these are the 2 wires that look as if they should be for the fan but im not sure :S

[Thunderbird]

(http://www.facebook.com/album.php?aid=2031153&id=1303317764&saved#/photo.php?pid=30833657&id=1303317764) copy this link for image