Ashley backbox's

[ShaneyG7]

Hi Sax-P-ers

Just bought an Ashley back box off ebay.. 4" Tail Pipe..

Anyone got know or know any good or bad points with them?

Vids aswell would be great :y:

ShaneyG

[Aron]

surposed to be a horrible fit. Do sound OK but can be very loud.

[ShaneyG7]

Im just fitting back box onto new replacement centre section.. mate whos gonna do it is gonne replace CAT-Downpipe _ Centre Section _ New backbox.. says about an hour to do?

Will it fit easily or horrible like you said?

[jordannicholls]

ive herd they are dencent

[Aron]

if you are basicaly redoing the rest then they can make it fit better.

[theecho]

the only shit bit is the hangers they are supplied with make the exhaust hang VERY low!
i made my own hangers.. problem solved!

they aren't the loudest of zorsts, on tickover its quiet, mind you its always parked next to my mates saxo with a powerflow so you cant hear mine :P

mines quite loud when giving it some beans but i've got a manifold\decat :)

[tinytim6666]

i bought the 3 inch for mine
fitted it and it looked crap,
so ripped it off and sent it back and get my money back.

[theecho]

was that with the supplied hangers?

[tinytim6666]

yep. you could move the hangers round to set your height. but with having no bumper recess it hung so low

[ShaneyG7]

4inch isnt huge tho is it? im just after a decent sounding one dont want one loud.

Could just adjust the height of the exhaust tip using rubbers cudnt i?

i did with my old one, which backbox was massive and a think it was a 5 inch oval.

[ShaneyG7]

the only shit bit is the hangers they are supplied with make the exhaust hang VERY low!
i made my own hangers.. problem solved!

they aren't the loudest of zorsts, on tickover its quiet, mind you its always parked next to my mates saxo with a powerflow so you cant hear mine :P

mines quite loud when giving it some beans but i've got a manifold\decat :)

Got any pics mate, what size u got on?

Cheers,

ShaneyG

[tinytim6666]

plus on mine the tip stuck 4 inch out form the back bumper

[ShaneyG7]

Will tht be the difference from a 1.1 to a 1.4, mine not stick out as much being a diff exhaust setup?

[Sparco_Tom]

you will want to cut the the cup insert down which slides into the backbox. You will see what i mean when you get it.
This is because it causes the tip to stick out very far from the car.
As for the hangers just get some shorter rubbers and adjust the hangers accordingly

[theecho]

Got any pics mate, what size u got on?

Cheers,

ShaneyG

Yar har, here's three quick'uns

http://i35.photobucket.com/albums/d191/theecho/DSC_0662.jpg

http://i35.photobucket.com/albums/d191/theecho/DSC_0663.jpg

http://i35.photobucket.com/albums/d191/theecho/DSC_06643.jpg

it needs adjusting slightly as its melting my bumper atm lol, car was filthy when these were taken also ;)

[ShaneyG7]

Will i have to cut then re-weld up? When you have tht Cat and Centre pipe mate? Ive got money in the bank waiting

[ShaneyG7]

nice mate, nice angle huh :y:

Im worried about mine looking stupid coz its at standard ride height.. yours will suit it due to it being slammed, how much ur suspension setup cost ya?

[Sparco_Tom]

pm me now,
no welding is needed. There is an insert which you have to push into the backbox so it can mount to standard centre section.
It requires cutting down before pushing into the back as its actually designed for the centre pipe to cat joint

[ShaneyG7]

pm me now,
no welding is needed. There is an insert which you have to push into the backbox so it can mount to standard centre section.
It requires cutting down before pushing into the back as its actually designed for the centre pipe to cat joint

Right ok pal, cheers