vtr to vts wiring please explain

[djinuk]

ok , ive used the search, and im still not 100% on the wiring.

am i right in saying if i get 2 cars , vtr and a vts from the same phase, so that they are either both single slot ecu or both 3 slot ecu then the wiring is plug and play spec?

if not how hard is it to splice the looms together and dose anybody have a diagram or failing that how hard is it to simply swap the full car looms.

Thanks

[CoolC]

If you get the ecu and loom from the same mark as your car it will be plug in and play.
If not there are ways around it....

Can identify the wires and join them manually.

OR you can get the whole interior loom aswel as engine loom and change it all, its not as difficult as you'd think.

[jeffchiz]

yea if you get a donor car so you can get everything you need engine, g/box, loom, unlocked ecu all you have to do is just take old engine out bolt new engine in and connect the loom to the engine which is piss easy and then connect ecu and connect the loom to the interior loom and then it should start

[djinuk]

sweeet appreciate the time guys, ive done harder conversions but just never a saxo.. i did a gti6 to 205 conversion..

I plan to get the whole lot done and running in a weekend.

[mardiGRANT]

woooo plug and play i like that :D