View Full Version : Gearbox oil
SxO13
19th April 2010, 18:25
Does any1 have a diagram or thred on how to change gear box oil ?
jaytay
19th April 2010, 19:18
dont av thread but if u look down rite side of engine where box is the hole and plug to put oil in is there but gettin out only did when changed driveshaft
jono83
19th April 2010, 23:21
2litres of 75w80 is what i use.
jack it up take the passenger wheel off might have to take the arch liner out and on the back of the gear box will be 2 plugs will a square hole in them to remove them you will need a 9mm i think sump plug tool. remove the the lower one to drain it. replace plug( you may also want to replace the tiny gasket but not essential) and start filling through the top hole, i found it easiest to use a funnel with a long flexi spout rather than using the one on the bottle. fill it up untill the fluid is jus level with the bottom of the hole replace plug and your done.
hth helps any questions jus ask
jono
SxO13
20th April 2010, 12:06
yea i changed my driveshaft and forgot the oil been over 2 months now so i think i should do it !! lol cheers guys
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.