Performance Figure + Modifications. Show us yours!

[CraigLovelock]

Hi.

Thought it could be a good idea to get people to post up dyno's printout etc and list what modifications were done etc. Could be a good way to get 'Rough' figures on what can be achieved. Not sure if this thread will success but hey :)

Ill start.

Car: 52 plate VTS
Modifications: 0, nill, nothing, standard!
BHP (Fly): 116
Tourque: 107

Print out (Ktec Racing):

http://i253.photobucket.com/albums/hh43/craigusg/DSC00032-1.jpg

[Gareth_R]

Car: AX GTi with VTS engine (2 prong head pre EGR valve)
Modifications: Raceland 4-2-1, straight through exhaust with mongoose backbox, induction kit with cold air feed
BHP (Fly): 139.8
Tourque: 119.1

Print out (Northampton Motorsport):

http://i210.photobucket.com/albums/bb136/richardsgareth333/gti/RR-May2010.jpg

obviously figures can be unreliable but thats a good 6 or more bhp above other vts engines with the same mods on the same rollers on the same day.

[dorsetsaxo]

98-s mk1 vtr early sivertop 90bhp

mods,

janspeed 4-2-1, supersprint race pipe, piper backbox
lightened standard fly wheel to 3kg
rallye inlet on vtr throttle body
pipercross viper through ns wing
106.3hp (fly)
110 ftlb touque
118000miles

http://i89.photobucket.com/albums/k239/v6cally/myrun.jpg

[Philly1983]

That must be a very well looked after car Craig to only drop 4 BHP in 8 years !

[Saaamon]

That must be a very well looked after car Craig to only drop 4 BHP in 8 years !

I got 115.0bhp on dd's standard 16v with 100k. Lost the graph though.

[Finchowned]

I got 124.7Bhp at the fly with 80k miles. That's with a Raceland manifold, Magnex de-cat, Magnex cat back and a panel filter. Dunno where the graph is but it was sweet!

[SnakeVTR]

so say you have 120bhp at the flywheel, what would you expect at the wheels ?

[AndySAXO]

normal be between 20 to 30 bhp tranny loss so you be looking about 90-100 bhp at the wheel dude :y: can get less tranny loss, all depends on what condision the gearbox is in wheel your using, but normally you would see btween 20 and 30 bhp loss.

but some dyno just have it pre calc so it the same on every car, some dyno calc on the down run.

[manc]

Car: 2000 plate westcoast
Modifications: electric turbo @10kws :oops:
BHP (Fly): 169.6
Torque: 161.9 @5126

http://www.zen16052.zen.co.uk/new-vts/turbo/cctuningRRday/rr-graph1.jpg