how to make a saxo 1.1 sound meaty

[BballBen23]

hello i have a saxo 1.1 with vts wheels arches the lot all done properly only thing that lets it down is the back axel with drums and the sound. could any one help me with advice on how to give it the sound of a vtr / vts thanks

[Robbie-Flat-Arch]

vtr engine lol. erm induction kit would be a start mate then look into a new system or backbox

[-Alex-]

4-2-1 or 4-1 Manifold
Kamracing v2 mani back exhaust

Done

[BballBen23]

http://yfrog.com/j6photo0253kj

[BballBen23]

hello i have a saxo 1.1 with vts wheels arches the lot all done properly only thing that lets it down is the back axel with drums and the sound. could any one help me with advice on how to give it the sound of a vtr / vts thanks

http://yfrog.com/j6photo0253kj

http://yfrog.com/j6photo0253kj

[Robbie-Flat-Arch]

looks very smart mate just a shame its a 1.1 but oh well good job. what other plans u got/

[BballBen23]

it has an induction kit on it and i did have a scorpion back box on it but it just sounds perfetic so its got a standerd box back on

[Robbie-Flat-Arch]

well to be honest mate to what alex said and get the mani but it is worth getting a backbox just try a different make

[BobC]

Hey fella, welcome to the forum. Very nice looking car.

Thinking laterally you could try this: http://www.sounds-of-supercars.com/

[BballBen23]

ok thanks guys im have to do some resurch on what manifolds to look at as i dnt reli no wot ones can go on it i think the one on it has a act in it or soemthing my friend was saying and some thing about laam sensors lol im useless

[-Alex-]

I didn't understand a word of that, but with it being a mk2, the oil filter gets in the way, so you need to either move it, or buy a 4-1. Differences between the 4-2-1 and the 4-1 are so slight, there's no point even going down that route of explaining.
The second lambda sensor needs to be sleeved, so that the car doesn't show the ecu light and go into limp mode.

[SaxoJamie]

car looks bloody good for a 1.1 nice work :y: As said just get a new exhaust system (supersprint full system should be very loud with decat) keep the induction kit on there and make sure it gets a good feed of cold air.

[westy24]

You do all this work urself mate ?

[Sparco_Tom]

just buy an exhaust job done :y:

[jphni20]

If your getting a manifold, the raceland 4-1 for the mk2 is good (get it from kam racing).

No need to move oil filter and the second lambda doesnt need to be sleeved as the manifold will have 2 lambda holes or at least mine does.

[Dave-B]

Just buy a decent backbox
I reccomend sportex for 1.1, nice low tone :)

[Pearson]

Raceland induction kit, got one on my vtr and it sounds really grunty and get a ashley system or supersprint, ive heard the ss system on a 1.1. before and it sounded mint.

[BballBen23]

hello i have a saxo 1.1 with vts wheels arches the lot all done properly only thing that lets it down is the back axel with drums and the sound. could any one help me with advice on how to give it the sound of a vtr / vts thanks



http://i992.photobucket.com/albums/af50/bballben23/Photo0253.jpg

[raunchz]

http://www.youtube.com/watch?v=F3RbvFXQYJo&feature=fvw

[sprint_gti]

do wot i did.. first mod was vts engine...

[woodyemma]

Ever heard of cherry bomb exhaust. You banger them on eBay just search forcherry bomber n u should find one. They steam American company and their exhausts are some of the nicest sounding around IMO. They are pretty much straight thru pipe with an inch of fiberglass round the outside. Sweet

[BballBen23]

Ever heard of cherry bomb exhaust. You banger them on eBay just search forcherry bomber n u should find one. They steam American company and their exhausts are some of the nicest sounding around IMO. They are pretty much straight thru pipe with an inch of fiberglass round the outside. Sweet

ill look into that thanks