PDA

View Full Version : manifold fitting

landy
12th April 2006, 02:35
can peolple please help me out

was thinkin about buying a 4-2-1 raceland manifold

can people tell wot tools ill need and how to fit it

cheers landy
hesslevtr
12th April 2006, 02:46
13mm spanner and socket

16/17mm spanner n socket

wd40
landy
13th April 2006, 01:34
13mm spanner and socket

16/17mm spanner n socket

wd40
y wd40?
cammedvtr
13th April 2006, 01:39
because the bolts my be a little tight and rusty.

ive just taken my ashley comp mainfold of and all i used was a 13mm socket for the 8 manifold bolts, a 17mm socket for the gear box bracket, then a big adj for the lambor sensor and lastley a couple of 10mm spaners for the manifold to decat bolts.

easy smileys/smiley4.gif
landy
13th April 2006, 02:03
are they hard to fit alex some tips would be very nice
benreader
13th April 2006, 02:07
they can be a bit of an arse to get on and off because of the postion etc also the bolts can become seized occasionally so becarefull not to sheer them off in the cylinder head. other than that its a pretty straight forward job, just take your time.
landy
13th April 2006, 02:36
just been speaking to hessel and were gonna meet up and do it one day
hesslevtr
13th April 2006, 02:38
take ur time brake less (i should listen to myself)

they are a little bit fidley when taking off i had to remove oil filter to get old 1 out and new 1 in
landy
13th April 2006, 02:53
well u best take ya time with mine lad