PDA

View Full Version : ashley exhaust fitting

Robbie-Flat-Arch
27th July 2010, 21:41
are they normally good fitting or do they tend to hang a bit low? if so how do you correct it
bushy90
27th July 2010, 23:28
I believe they have adjustable hangers!
Whirly
28th July 2010, 16:41
yh they normaly hang a little low but could use shorter exhaust hanger rubbers or use cable ties to bring it up in to the exhaust recess more
Tommyboy1507
28th July 2010, 16:45
when i had one i found it came out the recess too much
saxo_mike
28th July 2010, 17:05
i had the back box and the fit was crap, hangs mega low and at an angle
DansexysaxoVTS
28th July 2010, 17:08
i had that promble with mine but if you keep trying you can get it right and put a bend in the hangers to get them shoter
Robbie-Flat-Arch
28th July 2010, 20:14
ok what do you all think to the exhaust after sorting out how it sits? is it a nice exhaust
Whirly
28th July 2010, 20:32
how come your going for an ashley back box mate if you dont mind me asking ?
Robbie-Flat-Arch
28th July 2010, 20:38
just thought they were a good make and nice sound unless you can recommend something different?
LeeM
29th July 2010, 17:46
put the hangers in the rubbers and then loosen the fixing, rotate the back box until its at its straightest (due to design it will stick at an angle, its meant to be straight to reduce restrictions) then pull the hangers as far apart as you can so that they are almost paralel with the floor.
when i had mine i had it almost touching the bumper recess and pretty straight, its just a case of messing with it for a while