Fueling

[benkelsall]

Will be running jenvey bodies and 708s on a 16v. What FPR size is best to get?
And what size injectors to get aswell?

[raunchz]

3.5Bar

standard vts injectors

[AndySAXO]

i would say clio sport ones... as even on a 3.5 FPR and standard vts injectors at 157 bhp was running about 90-95% fuel duty.

so to be on the safe side would go clio sport injectors .

[raunchz]

But your clio sport injectors only flowed sub 250cc@3 Bar ? So that is flowing pretty much the same as vts injectors at 3.5Bar?

If you can fit them in, i'd go for the gti-6 injectors (285cc) over the clio sport injectors.

the gti6 ones are longer so you will need some spacers on the fuel rail to fit them in.

[jeffchiz]

But your clio sport injectors only flowed sub 250cc@3 Bar ? So that is flowing pretty much the same as vts injectors at 3.5Bar?

If you can fit them in, i'd go for the gti-6 injectors (285cc) over the clio sport injectors.

the gti6 ones are longer so you will need some spacers on the fuel rail to fit them in.

mallyauto (sp) has gti-6 injectors on his car and used some spacers so you can get them to fit, and are vts oem fprs 3 bar and the vtr ones 3.5 bar?

[raunchz]

mallyauto (sp) has gti-6 injectors on his car and used some spacers so you can get them to fit, and are vts oem fprs 3 bar and the vtr ones 3.5 bar?

yeh, vtr = 3.5Bar, vts = 3Bar

[jeffchiz]

this might sound stupid but where are the fpr's located? are they under one of the covers below the rear bench?