PDA

View Full Version : vts 8v cams

tomasvts
29th April 2006, 07:02
hi i am from chile and i have a saxo vts 8v 2002 with induction kit ,
mainflow and 2` line , now i want to put a new cam and remap, but i dont
know what cam is avaible for my car, can anyone help me? where i can find it
thanx sorry if my english is bad smileys/sad.gif
b0t13
29th April 2006, 07:21
the vts is 16v mate and i cnt help u with anything else..
Baz
29th April 2006, 07:23
VTS tends to be a 1.4 abroad jay smileys/smiley2.gif Saxo Cup is the 16V 1.6
tomasvts
29th April 2006, 07:34
sorry but here in chile arrived saxos vts but with vtr engine , well. only i
know because of that my vts or vtr is 8v 100 hps. but for a vtr my question
is what camshaft perfomanse kit can i buy?
boz
29th April 2006, 10:14
you can get a selection of different cams mate.
piper cams or kent cams do a kit with the cam and new springs etc, i would look at getting a vernier pulley to, so you can setup the timing. you will need a remap to get the best results from a cam upgrade to.

you can also buy a custom cam that has profiles ground to suit the mods on your car.

Have a look at gmc motorsport website in the uk smileys/smiley2.gif
dirt_geezer
30th April 2006, 21:52
hate to shit on ya chips boz but ya dont have your cams ground down a high lift cam is a increases lobe size not ground down
boz
30th April 2006, 21:58
WTF?

i never said ground down smileys/smiley5.gif
the profile of a cam or the cam lobe is produced on an offset grinding machine centre. hence i used the word 'ground'.

hate to shit on your chips but speak english in posts mate smileys/smiley2.gif
Sean
1st May 2006, 23:09
hate to shit on ya chips boz but ya dont have your cams ground down a high lift cam is a increases lobe size not ground down

still has to be ground from a blank though....
boz
2nd May 2006, 12:24
smileys/smiley2.gif smileys/smiley17.gif
Subtle
3rd May 2006, 03:10
lol Gold Star for Boz!

There is a post in here called "Cam", if you have a look in there you will find a lot of information Tomas that might help you out.

Click here (http://www.sax-p.com/forum/forum_posts.asp?TID=32859&PN=2)

there's the link ^^
boz
3rd May 2006, 05:53
some peeps under estimate me.

i know how cams etc are made, i have ground them before (not for a car, but its the same process) LOL

Anyone want any of these chips i have with shit on them? LMBO! © sax-p
badboyben88
8th June 2006, 16:30
LMBO! © sax-p