ashley exhaust fitting.

[phi1]

Hi there got an ashley race exhaust today. Got the centre pipe on and trying todo the backbox, what way round do the clamps need to go as everyway I try it's almost touching the floor really crappy. How do I make it sit higher?

Cheers phil

[toxic]

how low is your car ? you might need new rubbers on or just ask were you got it from how to fit it. put a picture on here then we can see.

[Robbie-Flat-Arch]

hello mate i done mine the other day and sits really well. i went to halfrauds and got some different rubbers which helped alot and you have to rotate the box as they are dead straight so will go up and down with a twist

[phi1]

Do you have any pics what way the clamps should go? So your saying fit it and then push the backbox up with the clamps loose and then tighten.

[Robbie-Flat-Arch]

got ones simular to these but have round holes instead so fits really well on the hangers sorted mine out really well mate

http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_20 7299_langId_-1_categoryId_165660

[Robbie-Flat-Arch]

ok one clamp is longer yeah? the longer one goes closer to the wheel with the shorter one closer to the spare wheel cage

[phi1]

ok one clamp is longer yeah? the longer one goes closer to the wheel with the shorter one closer to the spare wheel cage

Cheers mate, thats atleast sorting it a bit!!

[Robbie-Flat-Arch]

http://i980.photobucket.com/albums/ae284/robbie-woods/DSC05623.jpg

thats how mine sat mate took a bit of time ut got it hanging well and i would advise u to get those rubbers as they made alot of difference

[Mochachino]

bend the hangers

[Robbie-Flat-Arch]

u cnt bend them as there is a cross brace bit on the hanger and if u do it will flex like fuck without it

[tinytim6666]

http://i980.photobucket.com/albums/ae284/robbie-woods/DSC05623.jpg

thats how mine sat mate took a bit of time ut got it hanging well and i would advise u to get those rubbers as they made alot of difference

mate how long did it take you to do that cut out??
looks a very neat and tidy job :y:

[Robbie-Flat-Arch]

well cus i work out on site we have loads of wood hole cutters so took my car in quickly and used it took about 2mins :)

[Mochachino]

u cnt bend them as there is a cross brace bit on the hanger and if u do it will flex like fuck without it

Bent mine fine.

[Robbie-Flat-Arch]

Bent mine fine.

oh ok mate my mate tried to bend his and it snapped the weld on the cross brace and now just bounces around everywhere

[phi1]

Ill post a pic soon!

[tinytim6666]

well cus i work out on site we have loads of wood hole cutters so took my car in quickly and used it took about 2mins :)

sweet pal
ive got some hole cutters
wat size did you use??

[Robbie-Flat-Arch]

sweet pal
ive got some hole cutters
wat size did you use??

erm 4 inch mate but if you have the little recess on ur car atm like all the 1.1's do the take ur time i spent half hour marking it out before going near it with the hole cuter. just make sure u center it really well otherwise you will be pissed off when your exhaust looks like it sits off center

[Robbie-Flat-Arch]

Ill post a pic soon!

and yeh post a pic mate will be good to see what yours looks like

[tinytim6666]

cheers pal :y:
dont worry il be taking my time lol
ps sorry for the hijack

[Robbie-Flat-Arch]

cheers pal :y:
dont worry il be taking my time lol
ps sorry for the hijack

gooood when you do it because the drill bit goes in the hole cutter i had my drill bit almost at the blttom of the bumper which gave me the half circle and left a really good job if you go to high with it then you will get 3 quater circle