mk1 vts in a mk2 vtr

[blackie_2k5]

as above, how much of a piss on is it splicing looms, how many sensors would i need if i got a 3plug ecu and loom for the mk1 engine?

[Regan]

just done this i put a s1 gti 16v in my mk2 vtr
i used the gti loom and spliced the vtr multi plug onto it. I can give you all the pin outs for the gti loom but thers
not much info for the vtr loom so you will have to multi meter it all
i was scratching my head for a few days checking my ecu and relay ect turns out i had the wrong wire due to a diagram not being acurate.
It can be done but it will take more time than geting a plug and play loom

[ryansaxo2010]

aasl u nnect the fat white wire cc2 to the skinny white wire cc2, fat blue to fat blue .. fat white to other fat white... itll start the rest is lights and diagnostics and immobilizer.. i have a full pin out instructions as i have dun this conversion if ur interested

[Regan]

aasl u nnect the fat white wire cc2 to the skinny white wire cc2, fat blue to fat blue .. fat white to other fat white... itll start the rest is lights and diagnostics and immobilizer.. i have a full pin out instructions as i have dun this conversion if ur interested

wish you posted this a few weeks ago lol !
So you have vtr pin out ? Any chance of a copy for future referamce ?

[ryansaxo2010]

yeh sure ill dig it out now and ill put it up in a seperate thread so every 1 can just copy and print it as there is lodsa ppl asking this queastion

[Regan]

good man ! Would of saved me loads of time with that !

[blackie_2k5]

as above, that would help me alot, any chance you can post a link to the thread in here?

[ryanessex]

same here please