Cams Diagrams

[Cup_JV]

Can anyone explain me how can I make a Diagram to my Saxo Cup (VTS) Cams.........

The Cams Are a CatCams 734.....................

Thanks.............

[blackie_2k5]

are you using a translator mate? i think either the translator is wrong or your english is a little inaccurate

what do you mean by diagram? what is it your trying to do?

[Cup_JV]

are you using a translator mate? i think either the translator is wrong or your english is a little inaccurate

what do you mean by diagram? what is it your trying to do?

Sorry I don`t now whitch is the right Word............

What I need to now is how to put the 734 in their perfect point........

every cam have their perfect point but their is the need to put the cam in a certain angle, so what I what do now is how to do it.................

[blackie_2k5]

you need the diagram to "time up" you cams correctly? i thought thats what you meant but wasnt sure.

if you search: catcams catcams 734 timing marks

or someting similar you may find it, OR take the numbers off the camshafts and search them in a search engine, you may find them, i doubt anyone on here will have them mate

[Cup_JV]

you need the diagram to "time up" you cams correctly? i thought thats what you meant but wasnt sure.

if you search: catcams catcams 734 timing marks

or someting similar you may find it, OR take the numbers off the camshafts and search them in a search engine, you may find them, i doubt anyone on here will have them mate

No the problem isn`t that, i have all the informacion I need............

What I need to now is How To do the " Timing "

peak angle Intake - 108°
Exaust -108°

[blackie_2k5]

are you getting any modifications to the ecu? remapping?

[Cup_JV]

are you getting any modifications to the ecu? remapping?

The car in question has:

pistons T4
Piper Cams Double Valve Springs
head as been worked (sooner or later will be exchanged for a JP4 head )
exaust 4-2-1
exaust line 55mm and
Muffler SuperSprint 100% Inox

the ECU will be reprogrammed after the car ready

[blackie_2k5]

whoever reprogrammes you ecu should "time up" your cams correctly, if they know what they are doing