JP4 fuel rail, no return??

[jeffchiz]

am i right in thinking that the JP4 fuel rail has no fuel return on it?

[Sophia_Bush]

yes you be right

[jeffchiz]

awesomeee, ive blocked the fuel return off on my J4 engine and its held strong for a year but today it popped off i didnt realise and i lost over £20 worth of fuel and for a student thats a s**t load of fuel!!! lol and i really cant be bothered fitting a fuel return im sure its easy enough but id rather just fit a new fuel rail :D

[Sophia_Bush]

http://img.photobucket.com/albums/v244/Sadako_Yamamura/New%20106%20GTi/IMG_0325.jpg

may need modding a bit but wont be hard oh fpr is on the end of j4 rail jp4 for is not above the tank. Dunno how you have yours setup

[jeffchiz]

ive just got a normal 16v engine how it would come straight out of a vts just with a length of pipe coming off the fuel return with a bolt tigerseal'd in the end lol didnt really understand about the fpr? will i need to swap them over and use the j4 fpr or can i use the jp4 fpr?

[Sophia_Bush]

j4 fpr is on the end of the rail jp4 has no provision for this as will be on top of the tank

if your vtr was a silvertop then will have fpr under the rear bench if blacktop then id just keep j4 rail as would need to bugger about plumbing fpr in sep

[jeffchiz]

oh i see, i had a silvertop engine so yes ill have the fpr under the bench? so should be a straight swap?

so (i might sound like an idiot here) but as i had a silvertop engine ive got the fpr under the rear bench and because i fitted the J4 engine i ALSO have an fpr on my fuel rail, so ive currently got 2 fprs?

[Sophia_Bush]

yes you have 2 fprs

in that case jp4 is all good to go with a small bit of modding

[jeffchiz]

brilliant, have you had any experience of fitting them to j4's in terms of what needs modding?

[Sophia_Bush]

just the brackets that hold it on to the inlet everything else fits fine from when I tried it easy enough to sort out

[jeffchiz]

ok thanks for the help mate better get myself one ordered :y:

[Sophia_Bush]

wait till weekend and ill take the one off my c2 inlet above for you?

[jeffchiz]

wait till weekend and ill take the one off my c2 inlet above for you?

how much would you want delivered for it mate? im guessing i can use my own injectors? also has this one ever been fitted to a J4? or has it only just been fitted to that c2 inlet?

[Sophia_Bush]

never been fitted to a j4 just as in the inlet as above, cost of postage its yours

[jeffchiz]

really appreciate it mate just let me know how much postage is and ill send it straight over paypal :y: