The best induction!

[jeppy24]

Heres a thread where you can show off your induction set ups!

Whats the best looking? and best performance?

[Kai]

Haven't got a photo off hand, but not forced induction? Any enclosed! Personally prefer the ecosse!

[jeppy24]

Not forced induction, just looking for pictures of people set ups!

[cossie0_4]

think alot like the reaceland but i havent a pic of these mate

[Mochachino]

Raceland for budget enclosed.

Better panal filter for the best value for money.

K&N Gen 2 for open induction that costs a little more. Also comes with cold air feed.

Pro Comp for the best sounding good performing best looking enclosed induction.

[Cammy]

Raceland for budget enclosed.

Better panal filter for the best value for money.

K&N Gen 2 for open induction that costs a little more. Also comes with cold air feed.

Pro Comp for the best sounding good performing best looking enclosed induction.

Ill see your pro-comp and raise you an open cone filter from ebay for £5.

Danny - do you not rate the BMC any good?

[Colin]

Set of Jenveys imo ;)

[-shuggles-]

Set of Jenveys imo ;)

now your talking :p

[Mochachino]

haha :p deal?

I personally dont rate them at all, that tiny hole for the air to get into even with a cold air feed I dont rate them, seen plenty of rolling road print outs show poor results for them too.

Completley useless without a cold air feed and perfect for heat soak.

[crabzy]

raceland is the best without going stupid with your money .

[jonathon5]

raceland is the best without going stupid with your money .

Raceland with £20 big wolfrace fitted gives descent results

http://i236.photobucket.com/albums/ff121/jonathon-rensport/Air%20Filter/IMG00200-20100930-1748.jpg

[jonathon5]

For loud induction noise without using bodies

HKS off a Skyline GTR

http://i236.photobucket.com/albums/ff121/jonathon-rensport/48a756fc.jpg

[Kai]

http://img10.imageshack.us/img10/7711/copyofimg9945.jpg
Found one this morning for ya :)

[Sophia_Bush]

GT25R is a great induction kit

[white11]

http://i1117.photobucket.com/albums/k599/white115/db4e1d7a.jpg
Home made kit with k&n filter ( not fitted in pic )

[Lewis]

http://i1117.photobucket.com/albums/k599/white115/db4e1d7a.jpg
Home made kit with k&n filter ( not fitted in pic )

Thats an impressive pipe, did you buy it or use a mandrel bender?

My old one:
http://i723.photobucket.com/albums/ww239/L_E__W__I_S/IMG_3379.jpg

[Pearson]

Raceland enclosed induction kit with green cotton air filter;

http://i55.photobucket.com/albums/g149/gazmyers/S8001268.jpg

[white11]

Na it came of a honday pralude and did a small bit of modifing (cut 2" of and turn a bend around) :) and thanks m8

[Morris008]

Quite like the look of the Raceland kits, are they much bother to fit though?

[JonCarter]

Raceland with £20 big wolfrace fitted gives descent results

http://i236.photobucket.com/albums/ff121/jonathon-rensport/Air%20Filter/IMG00200-20100930-1748.jpg

got the same filter and housing, mine doesnt really perform untill its in the 3k rpm range probably because its a 1.4 lol

[JonCarter]

http://i1117.photobucket.com/albums/k599/white115/db4e1d7a.jpg
Home made kit with k&n filter ( not fitted in pic )

its different ill give you that....

[crabzy]

Quite like the look of the Raceland kits, are they much bother to fit though?

welll there not that many left mate so i buy one off kam mate before the run out :y:.

[Morris008]

welll there not that many left mate so i buy one off kam mate before the run out :y:.


Might just do that, didnt realise they were in short supply. cheers mate :y:

[JamesR]

Pair of tights over the throttle body ftw

[JamesR]

http://i1117.photobucket.com/albums/k599/white115/db4e1d7a.jpg
Home made kit with k&n filter ( not fitted in pic )

Hold on, do you even have a filter?

If not, good luck with fitting your new engine :)

[JonCarter]

Pair of tights over the throttle body ftw

perfect for soaking up the heat, sick sound though y0!

[white11]

Hold on, do you even have a filter?

If not, good luck with fitting your new engine :)

Haha vts conversion come soon than haha na m8 i have just not on ther when pic was taken but :) lol

[white11]

Hold on, do you even have a filter?

If not, good luck with fitting your new engine :)

Just to relax yor mind ;)

http://i1117.photobucket.com/albums/k599/white115/e3ed310e.jpg

[Kai]

For the OP, the raceland some people struggle to fit around the coilpack I believe, so for that reason alone I bought the ecosse (and the fact its real carbon fibre) which was a piece of piss to fit!

[jeppy24]

Yeh throttle bodies are awesome

Has anyone got any good pics of there throttle bodies?

[Richy_Rich]

I'd say ITG is a great set up

















http://i266.photobucket.com/albums/ii256/Richy_106_Rich/f43861a4.jpg

http://i266.photobucket.com/albums/ii256/Richy_106_Rich/6c7337a7.jpg

[chris84]

http://i760.photobucket.com/albums/xx242/jamielaila/SDC11143-1.jpg

Just as good as a bmc in every way.

[lil_rascal]

What kit is that ^^^^^

[chris84]

Its a ash silicone elbow with a carbon fiber enclosed induction box and cold air feed, i cant remember the company name but its identical to a bmc. Was around £45 without the elbow iirc

[superCREG]

Raceland with £20 big wolfrace fitted gives descent results

http://i236.photobucket.com/albums/ff121/jonathon-rensport/Air%20Filter/IMG00200-20100930-1748.jpg

WANT!!!:panic:

[Saxsin]

Raceland enclosed induction kit with green cotton air filter;

http://i55.photobucket.com/albums/g149/gazmyers/S8001268.jpg

where did u get that yellow tubing for your bay??

[madmike231]

I've got a Pipercross Viper Carbon Induction Kit on my VTS, Sounds really nice and you can get a cold Air Feed that fits onto it and you can have that pretty much where ever you want it. :)

http://www.pipercross-airfilters.co.uk/catalogue/index.php?main_page=popup_image&pID=546

[crabzy]

where did u get that yellow tubing for your bay??

there was a guy on here that use to sell it . but if you know the size you can go to B&Q and get it.

[DannyVTS]

Has to be a ProComp surely?

Them racelands look shit tbh

Nothing wrong with a Gen2 but i'd rather have a ProComp/BMC CDA

http://farm6.static.flickr.com/5242/5288873692_dabca0dc03_b.jpg

[joe333]

BMC or Procomp!!

[crabzy]

Gen2 good :y:.
bmc i think there really good.
procomp i think they look good but not worth the money tbh .