Induction kit how to fit ?

[skitts]

just got a induction kit for my car just a few questions....

1) is it easy to fit ?

2) There is a hole in the induction pipe what is this for ?



any help would help please :)

[ian-bru]

what kit did you buy?

[VTHall]

they are very easy to fit...
hole in the induction pipe? upload some pics...

[Matty]

1) take the standard air box off, with a mk2 thats just undoing the jubilee clip where the air box meets the throttle body and undoing the bolt along the right hand side of the engine and removing the breather pipe located on the crank case from the air box, then lift the air box off (might have to wiggle it a bit). Then attach your induction kit with some piping and jubilee clips over the end of the throttle body.

2) this hole is probably to attach the breather pipe that comes off the top of the crank case/engine

[Mochachino]

push it on the throttle body. job done. you dont need any brain cells to fit an induction.

[_-john-_]

Better to ask then stick it in a freshly carved hole in the roof though innit

[Mochachino]

Better to ask then stick it in a freshly carved hole in the roof though innit

A person with no brain cells would do that. If they did that they shouldnt be behind the steering wheel of a car lol

[skitts]

it is a green induction and i was just asking as i dont want to mess it up is that not ok as i thought these forums where for asking or are they not for this >?

[Mochachino]

it is a green induction and i was just asking as i dont want to mess it up is that not ok as i thought these forums where for asking or are they not for this >?

Yes its fine to ask, you ask if its easy. As i said its that easy to fit you dont need any braincells to fit it, this answers your question of if its easy to fit.

[skitts]

well thanks for your input do you no what the hole is ?

[Mochachino]

Will be for the oil breather. You dont have to circulate it back into the air intake, you can either pipe the hole to a catch tank or put a separate breather filter on there.

[skitts]

ahh what one of them little filter things that are about a 5r

[II_IFAN_II]

Am gonna take over this thread now:P i have a cheepo ebay one and i cant get it onto the tb as the neck isnt long enough to have any clearence... anyone have a quick link to what extra pipe i might need?

[dave_1]

could do what i did to mine ifan and use bits of drain pipe then put rubber round it so it doesnt look to gash. or you can buy different pipes to fit try things like samco but theyre mega money.

[DannnyBoi]

Yea a bit of hose should go fromt he whole in the pipe onto the oil breather.