Jamie's White TD04 Starlet Glanza V - Mod List, Page 1

[N80Jamie]

Ok so i sold my vtr about a month ago now and have been searching the market for a decent Glanza V.. I picked up this yesterday and tbh, i love it! The power is great, ride is great, handling is great! I havn't got many pictures yet as im at college most of the week but here is a few:

http://i930.photobucket.com/albums/ad146/SheldonStyles/9e36f0e3.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/b68cee32.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/698d7b37.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/f0845eb7.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/eb402598.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/cc09cf0a.jpg

Mod List - Updated 03/07/11

Engine:
RaceTech TD04 Turbo kit
-TD04 turbo, (Reconditioned)
-Race-Tech SS Ramhorn Manifold
-Race-Tech SS 2.5" Modular Downpipe
-Race-Tech SS Screamer Pipe
-Race-Tech SS Braided Oil & Water Lines
-Tial 38mm Vband External Wastegate
HDI Front Mount Intercooler
Japspeed cat-back Exhaust system, fully heat wrapped
JAM Fuel Cut Defender
Rising Rate Fuel Pressure Regulator
Magnecor HT leads
Air Con Removed
TOM's 1.3bar Radiator Cap

Chassis:
16x6.5" Inovit TE37 Rep's
Toyo T1R Tyres
D2 Fully Adjustable Coilovers
Whiteline Adjustable Panhard Rod
Powerflex Polyurethane Engine Mounts
Cusco Front Strut Brace

Exterior:
ID-Workz Varis Front Bumper
Rear Wiper Removed

Brakes:
Grooved Discs (Front)
Yellow Stuff Pads (Front)
Braided Brake Lines

Electronics:
'MotorSport' Oil Temperature Gauge
'MotorSport' Boost Gauge
Blitz Dual Turbo Timer
ULTRA Multi Mode Meter Plus
Speedo Convertor
TOAD Alarm System

Im planning on getting a piggybank ecu and upping the boost on the hybrid CT9 to 1bar which should hopfully see me near the 200bhp mark. Other than this the only other things im planning are to remove the window tints and get some 98 spec rear lights to replace the crappy tinted ones!

[parry121]

epic car mate, always loved these, :y:

[harry289]

Mate that's ace. I love these cars. Looks like you got yourself a good one. Hope she does you well! :)

[N80Jamie]

epic car mate, always loved these, :y:

Cheers bud! Ye ive loved them for agessss! I know they get slated a lot on here but serisouly they're really not as bad as everyone makes out!

[VTSDanny]

I love them drove my mates really nippy :y:

[Richie2104VTR]

Are cool cars fo' sho', always been tempted by one.

Looks spot on as is and plans sound like it should go well.

[CHIP]

Normally, i don't like these. It looks quite tidy though, first i've seen that i don't mind.

[N80Jamie]

Are cool cars fo' sho', always been tempted by one.

Looks spot on as is and plans sound like it should go well.
I was very tempted and gave in ;) It goes like stink if im honest. My dad drove it home and even he was giggling! :p
Normally, i don't like these. It looks quite tidy though, first i've seen that i don't mind.
Cheers bud. Everyone has a soft side for these somewhere deep down :p

[tomsmarty]

Lush car mate, showed my mate and he knows the kid you bought it off! Small world :)

[N80Jamie]

Lush car mate!!

Thanks dude :y:

EDIT: Ahhh really?! Is a bloody small world haha, ive heard good things about the car on JPOC aswell, hopfully your mate isnt going to say its a dog :homme: aha

[tomsmarty]

No way! He said 'it's an absolute animal!' lol My mates the one who owns the starlet hes trying to sell that you commented on :y:

[parry121]

Cheers bud! Ye ive loved them for agessss! I know they get slated a lot on here but serisouly they're really not as bad as everyone makes out!

yeah they are good car's and you can do alot to them, never drove tbh but i bet they are nice to drive,

[N80Jamie]

No way! He said 'it's an absolute animal!' lol My mates the one who owns the starlet hes trying to sell that you commented on :y:

Thank god :p haha. It really is an animal; when my dad was driving home, got on the motorway, dropped it into 4th, hit boost and was spinning the wheels! Couldnt believe it! Aahh i see, how come hes selling up?

[billytalbott]

i would love a glanza some time in my life....

[N80Jamie]

yeah they are good car's and you can do alot to them, never drove tbh but i bet they are nice to drive,

Ye they are a really 'solid' car; 'Toyota' explains it all tbh. The power is awsome aswell and im only running 181bhp!

[tomsmarty]

Thank god :p haha. It really is an animal; when my dad was driving home, got on the motorway, dropped it into 4th, hit boost and was spinning the wheels! Couldnt believe it! Aahh i see, how come hes selling up?

Haha sounds good :y: Bought himself a honda civic 1.4, so the starlet needs to go for him to be able to afford the insurance lol

[N80Jamie]

Haha sounds good :y: Bought himself a honda civic 1.4, so the starlet needs to go for him to be able to afford the insurance lol

Fair enough. Staying Jap.. good call!

[tomsmarty]

Fair enough. Staying Jap.. good call!

Yeah! Showing it at japfest :) Anyway il stop clogging up your thread lol :y:

[N80Jamie]

Yeah! Showing it at japfest :) Anyway il stop clogging up your thread lol :y:

I shall also be attending Jappyyfest :)

[parry121]

Ye they are a really 'solid' car; 'Toyota' explains it all tbh. The power is awsome aswell and im only running 181bhp!

tidy mate. good luck with it, will be keeping an eye on this :y:

[N80Jamie]

tidy mate. good luck with it, will be keeping an eye on this :y:

Cheers :A:

[CitroenSport]

Very nice mate I have always liked these and would love one but insurance is mental for me, get to the 200bhp mark :)

[N80Jamie]

Very nice mate I have always liked these and would love one but insurance is mental for me, get to the 200bhp mark :)

Insurance is fairly expensive for me (£1800) but i can afford it so i thought i'd treat myself! Ye i'll be getting a piggybank ecu and upping the boost to 1bar which should see me near the 200 mark :)

[tomnelson]

try putting a larger bore exhaust on it :) the less back pressure you have the quicker your turbo spins up :D or get a volve t50 turbo on it ;) wish i could afford one :'(

[N80Jamie]

try putting a larger bore exhaust on it :) the less back pressure you have the quicker your turbo spins up :D or get a volve t50 turbo on it ;) wish i could afford one :'(

2.5" is the best bore size for these (so ive been told on UKSC) so this exhaust will do for now :) The only turbo i think i would consider is the TD04 from the scooby.

[craigy2703]

thats a mint one mate my mates got one and i love it how much u pay for it if u dont mind as they vary loads

[N80Jamie]

thats a mint one mate my mates got one and i love it how much u pay for it if u dont mind as they vary loads

Got this one for £3000 from a fellow enthusiast on JPOC :)

[N80Jamie]

Right just a small update. I've freshened up the car a bit by removing the window tints and re badging the car (stickers + badge). In my opinion i think it has totally changed the look of the car and for the better, the next thing is to get rid of the awful tinted lights! Here's a few pictures: :)

http://i930.photobucket.com/albums/ad146/SheldonStyles/2594a3d3.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/76f1da8d.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/638b9588.jpg

By the way i know the 2 small badges on the boot lid are not straight lol. Ill have to order some more and try again :p

[tomsmarty]

Stunning mate! Gonna look lush at Japfest! ;)

[N80Jamie]

Stunning mate! Gonna look lush at Japfest! ;)

Cheers mate, lets hope so :)

[miamibluebaby]

love the wheels, a couple of mates had these cars great fun, lots of potential :)

[N80Jamie]

love the wheels, a couple of mates had these cars great fun, lots of potential :)

Yee it is a really fun car from the very little experience ive had from it so far! :)

[VTHall]

looks smart jay jay, gonna have to take me in it soon :P

[Jay_]

they are ugly as sin from the back, but any other angle it looks great :y:

[Krys_23]

Dont agree about it looking ugly from the rear , Looks cooler than most of the shizz on here like, Bet its quick too! Loving the white also.

[dunno]

i love these cars mate and it looks mint! was thinking about buying one before i got my vts :y:

[stevo67]

I like it,proper little pocket rocket here was a mechanic near to me had 1 running 260bhp.


Steve.

[N80Jamie]

Havn't been on here in a while! Bit of an update to write up about. My Zisco Ram manifold was fitted about a week ago now and it seems spot on from the very short test run (up and down the street) :P Very quick picture:

http://i930.photobucket.com/albums/ad146/SheldonStyles/2df8a031.jpg

I also got my hands on a ID-Workz Varis front bumper from ebay for a bargain price of £120, never fitted or painted! I havn't test fitted this yet but plan to next weekend. Heres a picture of it feeling sorry for itself :p

http://i930.photobucket.com/albums/ad146/SheldonStyles/2dad691b.jpg

Finally, when looking up the previous owners username on JapanesePerformanceOwnersClub.com i found plenty of pictures from its past :) Heres a few (sorry about the mass of pics) :p

http://i930.photobucket.com/albums/ad146/SheldonStyles/Dsc_5329.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/Dsc_5302.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/DSC_0148.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/DSC_0145.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/DSC_0143.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/DSC_0115.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/DSC_0114.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/DSC01107.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/DSC00579.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/DSC00578.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/DSC00574-1.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/DSC00571.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/DSC00567.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/DSC00565.jpg

[tomsmarty]

Looking good as usual Jamie, will look good with that new bumper on :y:

[Boothy_UK]

amazing example of a Glanza!

[Furio-Gazza]

amazing example of a Glanza!

....+1! looks very smart :y:

[AL3X_]

Looks mint mate :y: Always wanted one of these, how much did you pay if you don't mind me asking(had a quick look trhough the thread and couldn't find it.

The Varis rep bumper should look sport on.

Rota Grid alloys (sticker made to look like Rays alloys)

To me they look like Inovits, can tell by the sticker obv and the multistud fitment which rotas don't have, the sticker will probably say "ravs" if i'm right rather than rays, look good none the less though.

[VTR_Andy]

love these cars mate. looks pretty clean too

[Dalesmith19]

Paid £3000 a think iirc looking back at the start of the thread!

Lovley Glanza 200hp would be sweet!

[miamibluebaby]

such a nice car, love them, this has got potential!

Two of my mates had them, one had a glanza, was around the 180bhp and was bloody quick

other mate had the ep82 gt again around 180-200bhp, which was mad... until he decided to pay 7K and his starlet for a 340bhp ep82 quad headlight monster tbh that car was mad,massive spec.. recored td04 the lag was lets say interesting, but when on boost my god made the glanza look like a micra!!

like i said seriosly got potential!

[N80Jamie]

Looking good as usual Jamie, will look good with that new bumper on :y:
Thanks a lot dude, yee can't wait to get it sprayed up and on the car!
amazing example of a Glanza!
Cheers bud! :y:
....+1! looks very smart :y:
Thanks mate :)
Looks mint mate :y: Always wanted one of these, how much did you pay if you don't mind me asking(had a quick look trhough the thread and couldn't find it.

The Varis rep bumper should look sport on.



To me they look like Inovits, can tell by the sticker obv and the multistud fitment which rotas don't have, the sticker will probably say "ravs" if i'm right rather than rays, look good none the less though.
Cheers mate, paid £3000 for it :) Yee i found out shortly after buying it that the alloys were Inovit Rays rep alloys (to look like the Volk Rays) :y:
love these cars mate. looks pretty clean too
Thanks bud, its getting treated to a full detail tommorow to :D
Paid £3000 a think iirc looking back at the start of the thread!

Lovley Glanza 200hp would be sweet!
200bhp will be spot on for me tbh. If i get bored from there, i won't bother going down the usual TD04 route, id rather save the cash and go forged first :p Then think about some bigger tubbys :)
such a nice car, love them, this has got potential!

Two of my mates had them, one had a glanza, was around the 180bhp and was bloody quick

other mate had the ep82 gt again around 180-200bhp, which was mad... until he decided to pay 7K and his starlet for a 340bhp ep82 quad headlight monster tbh that car was mad,massive spec.. recored td04 the lag was lets say interesting, but when on boost my god made the glanza look like a micra!!

like i said seriosly got potential!

I can imagine how quick that starlet must of been! Mine is very fast now and, as said, its only on around 180bhp at the minute! Its going to be along process but as long as i don't loose interest in the car im planning on going forged. Still unsure on what turbo i'd run yet though.

[AL3X_]

Cheers mate, paid £3000 for it :) Yee i found out shortly after buying it that the alloys were Inovit Rays rep alloys (to look like the Volk Rays) :y:


Not a bad price for what looks to be done, it looks a well looked after example as well :y:

[ryansmith]

loving the car mate, me and tomsmarty will have to keep an eye out for you at japfest then :)

[N80Jamie]

Bit of an update. The car was insured from last saturday and i am very, very impressed with the car! Love driving it and always find an excuse to go out in it :p

I went out on the sunday morning at 12.01am haha :p and at about 1am i was already at the pertrol pumps :p Heres a quick snap of mine and my mates Glanzas (mine on the left):
http://i930.photobucket.com/albums/ad146/SheldonStyles/a57f8773.jpg

Yesterday i fitted the front bumper (hasn't been sprayed or fogs fitted yet). Heres a couple of iphone pictures:
http://i930.photobucket.com/albums/ad146/SheldonStyles/03baf350.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/125a72ed.jpg

[Gary-VTR]

Are those genuine TE37s?! What fitment are they? :panic:

EDIT: Silly question just read your post 2 up. Still look quality even though they're reps.

[tomsmarty]

Looks stunning mate! Always loved your car :D

[N80Jamie]

Are those genuine TE37s?! What fitment are they? :panic:

EDIT: Silly question just read your post 2 up. Still look quality even though they're reps.

Haha :p Cheers dude!

1.3 powah ;)

[N80Jamie]

Looks stunning mate! Always loved your car :D

Thankyou very muchly! I love it even more now i can drive it! haha :p

[UKtom]

very nice car buddy! love the colour :) imo it looked better with tints though! :y:

[N80Jamie]

very nice car buddy! love the colour :) imo it looked better with tints though! :y:

Cheers matey :) Personally im not a fan of dark tints all round; makes it look chavy imo :| If i were to get them tinted again (which i doubt) it would have to be a very light smoke all round. :)

[hard_corejoeboy]

Only reason i don't like these cars is because they always decide to sit on my back bumper on straight roads and then bugger off when some corners appear!

Also everyone i know has had them blow up lol

[Ben]

Looks lovely mate, can't wait to see it with some standard rear clusters.

[N80Jamie]

Only reason i don't like these cars is because they always decide to sit on my back bumper on straight roads and then bugger off when some corners appear!

Also everyone i know has had them blow up lol
I think your area must be infested with chavs then dude :p

Granted, if you mod them wrong then you will run into BIG trouble with these. Since having this i've become a member on UKSC and vast majority have hardly any reliability issues :)
Looks lovely mate, can't wait to see it with some standard rear clusters.
Cheers mate, should have the standard lights in a couple of weeks :)

[hard_corejoeboy]

I think your area must be infested with chavs then dude :p

Granted, if you mod them wrong then you will run into BIG trouble with these. Since having this i've become a member on UKSC and vast majority have hardly any reliability issues :)

Cheers mate, should have the standard lights in a couple of weeks :)

True i am from Southend in Essex.

Went to sell some gti leathers to someone in Herne Bay and lo and behold what car came up behind me bumper to bumper?

You guessed it one of these....but it was a straight national speed limit road so i just stuck to 50 ;p

Nearly bought one myself before i turned into a handling addict instead of a power addict. Must say i like the look of yours..

[N80Jamie]

True i am from Southend in Essex.

Went to sell some gti leathers to someone in Herne Bay and lo and behold what car came up behind me bumper to bumper?

You guessed it one of these....but it was a straight national speed limit road so i just stuck to 50 ;p

Nearly bought one myself before i turned into a handling addict instead of a power addict. Must say i like the look of yours..

Haha fair one :p

I must admit i do love a good handling car and i am planning on getting this all braced up and do all i can to get it handling well :) Cheers !

[N80Jamie]

Well after having a think about what sort of stance/look i want to go for, i've got my heart set on a slight 'HellaFlush' type of look. Heres an image of the stance im after:

http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs073.snc3/14108_389020642057_504567057_4121618_788960_n.jpg

Opinions?

[hard_corejoeboy]

Sod stance its all about making it handle and go quicker everything else is a waste of time :D

[N80Jamie]

Sod stance its all about making it handle and go quicker everything else is a waste of time :D

But it looks so nice :( lol

[hard_corejoeboy]

It does but it looks mint already...

[N80Jamie]

Just have to see what money allows as if i did choose to go down that route i'd have to get arches rolled and all that jazz. Probably won't happen as im poor :) lol

[sn3ddon]

i like this to run big power you need the 1.5 bottom end out the toyota paseo mated with the 1.3 head my mate had one in falkirk and had a scooby turbo very quick and relible :)

[-shuggles-]

really like the whole stance scene. It is different from all the 'track' look starlets I see about:y:

[N80Jamie]

i like this to run big power you need the 1.5 bottom end out the toyota paseo mated with the 1.3 head my mate had one in falkirk and had a scooby turbo very quick and relible :)
A lot of people use the whole 5E engine. There are advantages and disadvantages of going down this route. I would personally rather forge the 4E block :)
really like the whole stance scene. It is different from all the 'track' look starlets I see about:y:
Ye, there aren't loads of 'stanced' starlets about. This is mainly down to the shit rear axle on them which means you can't get any camber on the back :( Still get some poke on the go though :p

[N80Jamie]

Havn't updated this for a while so here goes! First things first, ripped off the wiper arms sanded them down, primed and sprayed them. Also bought some flat wiper blades to go with them. Look so much better than they did; should have done it so much sooner! Shitty pic but you can see how black they are now :D

http://i930.photobucket.com/albums/ad146/SheldonStyles/92c124d5.jpg

Secondly, got my private plates fitted to the car which in turn got rid of the oldd broken pates already on the car. Ordered a pedo bear sticker which went on the back window and i found a black shocker sticker in the garage so that went on as well!

http://i930.photobucket.com/albums/ad146/SheldonStyles/f0f56315.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/6a141848.jpg

Finally, today i got my MOT done which it passed. Need to get a new set of discs and pads up front as they were described as very low. Also, both the rear wheel bearings were advised so they will be getting sorted asap. After the MOT went down to Birmingham to pick up a Cusco strut brace but may sell it so i can get something else im looking at :P

http://i930.photobucket.com/albums/ad146/SheldonStyles/f9da4d9f.jpg

:)

[tomsmarty]

Looking really good! Love the cheeky pedo bear :y:

[sn3ddon]

ive got a starlet gt turbo love it car looking mint mate

[N80Jamie]

Looking really good! Love the cheeky pedo bear :y:
Yee had to get one :p haha. :)
ive got a starlet gt turbo love it car looking mint mate
Cheers mate :y:

What sort of spec is your GT? Also, you on UKSC at all? :)

[lee_saxo]

Pedo bear sticker FTW !

[Lewis]

Looks immaculate there, this car could really do with a set of rear spacers. Wheels look a little lost under thoes arches.

As for stance, all Jap cars need it or they look pants :P

[N80Jamie]

Looks immaculate there, this car could really do with a set of rear spacers. Wheels look a little lost under thoes arches.

As for stance, all Jap cars need it or they look pants :P

I've been meaning to get spacers ever since i bought the car. I hate how much the rear wheels are in the arches! I need to see what size spacers i need and what type though (not clued up on spacers).

Ofcourse! Stance ftmfw! :p

[dunno]

Stance on that gt looking good! Definitely go for it :D
I've red up about the 1.5 bottom end from a paseo, would make it a monster!

[landerboi13]

looks smart mate.. love the sticker!

[CraigLovelock]

My mates one of these is running 290bhp... is fucking immence i must say.

Lovely little cars,

Also, rota grid drifts are awseme! i want to get some but 18"'s are quite expensive :)

[Dellboy_furio]

Looks awesome mate! Always had a soft spot for these, Was looking into getting one,
But its hard to find a mint one like you have! i'll be keeping an eye on this thread...

[PJN]

So that's what those wheels are. Lad across the road from me has them on his C2, and I always wonder why it says RAVS on them when you look really close.

Love these cars, on my list of potential next cars :p

[N80Jamie]

Stance on that gt looking good! Definitely go for it :D
I've red up about the 1.5 bottom end from a paseo, would make it a monster!
I will if i can find the money for Arch work and new alloys! haha :p

Ye, plus that bottom end will bring down lag times on bigger turbos ;)
looks smart mate.. love the sticker!
Cheers dude :y:
My mates one of these is running 290bhp... is fucking immence i must say.

Lovely little cars,

Also, rota grid drifts are awseme! i want to get some but 18"'s are quite expensive :)
Must be a monster at 290bhp! What sort of spec is he running?

Yep, Rota's are very expensive :( lol
Looks awesome mate! Always had a soft spot for these, Was looking into getting one,
But its hard to find a mint one like you have! i'll be keeping an eye on this thread...
True, there is a lot out there that have been owned by people who havn't got a clue. They'll just turn the boost up with no fueling mods, not service it at the right intervals.. Basically fuck them up for the next owner! lol.
So that's what those wheels are. Lad across the road from me has them on his C2, and I always wonder why it says RAVS on them when you look really close.

Love these cars, on my list of potential next cars :p
RAVS ftw ;) haha. I'd love to get a real set of TE37 Rays but they are silly money!

Get a Glanza, you won't be disapointed ;) aha

[N80Jamie]

Right after i had the MOT done i went through the advisories list and decided to correct everything on there before i do anything else to the car. It was advised on front brake imbalance, low front pads and both rear wheel bearings. First things first, i ordered a set of grooved discs and EBC yellow stuff pads from ebay. Heres a quick picture; will be fitting them tommorow hopfully as well as bleeding the system :)

http://i930.photobucket.com/albums/ad146/SheldonStyles/882fafad.jpg

I know they're not the best discs in the world but at £116 included pads, they'll do for now :) Also, after reading plenty of threads about the different types of EBC pads it will be interesting to see what i make of these yellow stuff pads! Very mixed reviews on all 3 colours!

[tomsmarty]

Ready for Japfest buddy? Disks look good :y:

[N80Jamie]

Ready for Japfest buddy? Disks look good :y:

Never made it to Japfest in the end :( Didn't have the money!

[N80Jamie]

Well the brakes are on the car but not without its problems! The back plate is rubbing against the drivers side disc brake which is very annoying and most probably will damage the disc. I took the calliper and disc back off today but there is nothing i can really do to push it back or move the disc forward :(

Anyway, besides that problem everything else went ok! Havn't bled the whole system yet but did go around each caliper to remove any trapped air. Will be beeding the whole thing sometime next week :) BONUS as well, found out that i have braided brake lines :P

http://i930.photobucket.com/albums/ad146/SheldonStyles/60958ebd.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/46dfad37.jpg

Obviously havn't tested the brakes out properly yet as im still bedding in the new pads but compared to the brakes that were on the car.. MASSIVE difference already!

[N80Jamie]

This arrived today :D

http://i930.photobucket.com/albums/ad146/SheldonStyles/f3b7c103.jpg

Just waiting on the heat wrap to arrive then it will be on the car! It's a Japspeed System and is a direct copy of the Blitz Nur Spec. They retail at roughly £250 but got it on eBay, brand new, for £102 ;)

[AL3X_]

Lookin good mate, really love these cars :y:

[tmile09]

nice glanza i had one a year or 2 ago myself running 221.4bhp.. ur better off staying below the 200 mark to b honest unless u want to be spending money every week there very tempremental when you put too much in.. i ended up doing a conversion to a 1.5 cynos engine with a ct9 and selling it.. really good conversion to do if your looking to move it up a bit more you can keep all your mods an just go up that .2 litre it makes a big difference.. best of luck with it its a very tidy example of a car that normally wrecked by 17 or 18 year olds with no clue

[N80Jamie]

Lookin good mate, really love these cars :y:
Thanks mate :)
nice glanza i had one a year or 2 ago myself running 221.4bhp.. ur better off staying below the 200 mark to b honest unless u want to be spending money every week there very tempremental when you put too much in.. i ended up doing a conversion to a 1.5 cynos engine with a ct9 and selling it.. really good conversion to do if your looking to move it up a bit more you can keep all your mods an just go up that .2 litre it makes a big difference.. best of luck with it its a very tidy example of a car that normally wrecked by 17 or 18 year olds with no clue
What sort of problems did you get when you starting modding then dude? Yee i've read up on the 5EFE and it might be something i'll consider sometime next year! :p Cheers for the kind words!

[N80Jamie]

My steel cable ties arrived today so wrapped the exhaust up ready for fitting tomorrow! Can't wait to get it on :D

http://i930.photobucket.com/albums/ad146/SheldonStyles/a75be24e.jpg

[hard_corejoeboy]

Thats a brilliant find that exhaust mate especially for that price

[Lewis1600]

Pics and vids of the new exhaust pleasseeee :D

[joe333]

niceee mate that looks madd how big is that back box like 5"

[gojka]

Can't wait to hear it with the new exhaust it sounds epic anyway! Haha

[N80Jamie]

Thats a brilliant find that exhaust mate especially for that price
Ye i was well chuffed when i won it on eBay :p
Pics and vids of the new exhaust pleasseeee :D
I've got pics to follow after this reply but not videos yet im afraid :( lol
niceee mate that looks madd how big is that back box like 5"
Its a 4.5" tailpipe. Typical Jap style haha :p
Can't wait to hear it with the new exhaust it sounds epic anyway! Haha
Sounds even better now dude ;)

[N80Jamie]

Well the exhaust was fitted yesterday and i'm loving the sound it makes! Gave the car a wash and polish today and got some snaps of the new exhaust; not very good ones but you get the idea! :P

http://i930.photobucket.com/albums/ad146/SheldonStyles/4bb9b199.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/5dce77a5.jpg

While i was cleaning the exhaust i noticed that my panhard rod didn't look very standard...

http://i930.photobucket.com/albums/ad146/SheldonStyles/4e70777e.jpg

Something i didn't even know i had! Whiteline adjustable Panhard Rod :D WinWin :P

[AL3X_]

Sits beatifully, anticipating some vids man. :y:

[Ben]

Looks lovely, what a bargain for that exhaust!! Get some vids uploaded :)

[Aaron]

what does it sound like exactly?
idle? on boost?
does it pop at all?
looks good tbh

[Dellboy_furio]

Good stuff, Great find on the exhaust! Get some Vids up mate:y:

[sn3ddon]

you jammie git , i found a japanese sweetie in my boot :) i wish it was a td04 tho lol

[N80Jamie]

Sits beatifully, anticipating some vids man. :y:
Cheers dude, i've got a video (not very good) but will upload soon :)
Looks lovely, what a bargain for that exhaust!! Get some vids uploaded :)
I know i couldn't believe it when i won it haha :p
what does it sound like exactly?
idle? on boost?
does it pop at all?
looks good tbh
It's a fairly bassy tone, fairly quite on idle, savage on boost and burbles and pops on overun. Cheers :)
Good stuff, Great find on the exhaust! Get some Vids up mate:y:
As said above, will be getting a video up shortly :)
you jammie git , i found a japanese sweetie in my boot :) i wish it was a td04 tho lol
Haha JDM sweet y0! ;) Hmm theres a TD04 kit on my dining room table.. :p

[N80Jamie]

Since fitting my Japspeed system nothing much has been done to the car. Met up with a fellow UKSC member last week some time for a bit of a boost and we both noticed a blueish smoke coming the exhaust. At first i wanted to cry because i thought it would be my engine (thinking the worst :P) haha but then after taking my intercooler piping off everything became clear! I had a lot of oil in the piping which points to turbo oil seals but luckily i have something to take it's place..

http://i930.photobucket.com/albums/ad146/SheldonStyles/b5f0b1cd.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/af779e74.jpg

Got this kit from Quadcorecraig (UKSC member, copied and pasted this update) at a good price. Originally wanted to go for a Racetech externally gated kit but for the time being this will be fine! I'm going to be running it at 0.6bar until i get all the other bits plus an emanage and then get it mapped :)

I've text quadcorecraig but havn't had a reply so someone else may know.. What would this actuator be set at? 0.6bar?

[Gary-VTR]

That downpipe is massive!

Can't say for sure with yours, but the 2 TD04s I've had have been 7psi & 8psi.

[Sam1990VTS]

WOW! ... nice :D very nice

[sn3ddon]

great update mate td04 running at 0.8bar is just shy of full boost on ct9 turbo :) oh a got tein coilovers for a tenner :)

[N80Jamie]

That downpipe is massive!

Can't say for sure with yours, but the 2 TD04s I've had have been 7psi & 8psi.
I posted this up on the 2 starlet forums and apparently some of the standard Subaru actuators are adjustable so had a look and this one is so it's all ok now :)
WOW! ... nice :D very nice
Aha cheers dude :Y:
great update mate td04 running at 0.8bar is just shy of full boost on ct9 turbo :) oh a got tein coilovers for a tenner :)
Ye can't wait to get it set up at 1bar, maybe a few months of that though considering i've got to get: fuel pump, injectors, ecu, braided oil lines etc lol. 0.6 will do for now though :p

How you manage that? lol

[c7borg]

Did they do a 3 cylinder version of these like the Charade? I wanted to buy one a while back but found virtually nothing for sale :(

[dannygti]

looking good, isnt the td05 a popular choice for these cars?

[N80Jamie]

Did they do a 3 cylinder version of these like the Charade? I wanted to buy one a while back but found virtually nothing for sale :(
Havn't got a clue haha :p
looking good, isnt the td05 a popular choice for these cars?
Cheers dude. The TD05 is slightly bigger than the TD04 so spooling times will be worse. The people who have forged engines do runner bigger turbos as they can up the boost to compensate for more lag. The 1.5 lump is also another option which will bring down lag a lot but i'm fairly certain one of the fastest starlets in the world is still running the 1.3ltr engine!

[dannygti]

ahh right, seems to be a fairly good turbo to use on smaller engines for decent power ;)


edit: that made me look like a dick, werent saying your car wont be decent power (just hinting at my new turbo) lol

[N80Jamie]

ahh right, seems to be a fairly good turbo to use on smaller engines for decent power ;)


edit: that made me look like a dick, werent saying your car wont be decent power (just hinting at my new turbo) lol

Haha :p Yee it is a good option to go for! Plus if you ever wanted to go Td05, VF28 etc they all use the same flange as the TD04 so you'll just need the new turbo ;)

[sn3ddon]

I posted this up on the 2 starlet forums and apparently some of the standard Subaru actuators are adjustable so had a look and this one is so it's all ok now :)

Aha cheers dude :Y:

Ye can't wait to get it set up at 1bar, maybe a few months of that though considering i've got to get: fuel pump, injectors, ecu, braided oil lines etc lol. 0.6 will do for now though :p

How you manage that? lol yeah a local lad is breaking his glanza and a made him a offer and he excepted lol hes got a 500bhp toyota cresta drift machine so im sure hes no bothered im going tdo4 with mine or maybe hybrid what suspension u running

[N80Jamie]

yeah a local lad is breaking his glanza and a made him a offer and he excepted lol hes got a 500bhp toyota cresta drift machine so im sure hes no bothered im going tdo4 with mine or maybe hybrid what suspension u running

He accepted £10? lol, what a tool! I'm running D2 coilovers dude.

[VTR_Danny]

That is one gorgeous car mate, I just checked out what it would be for me to get insured on one and it's 3800 fully comp!

[N80Jamie]

That is one gorgeous car mate, I just checked out what it would be for me to get insured on one and it's 3800 fully comp!

Cheers fella! Jesus lol. The only decent quote i got was from 'Sky Insurance'. Got insured with them straight away after hearing the price!

[N80Jamie]

Directly copied from UKSC so member names will not be recognised*

Well as some of you may know, i sold the WEPR kit i bought from Quadcorecraig as i didn't want to chop the exhaust blah blah. Went for a trip to Derby to see 'Saun Glanza V' (Think thats the right spelling :P) and bought his basically brand new Racetech TD04 Kit! Spent the last couple of days getting things on, chopping intercooler pipes etc lol. Heres a few pictures of the result:

http://i930.photobucket.com/albums/ad146/SheldonStyles/cc6bb51d.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/085770c2.jpg
http://i930.photobucket.com/albums/ad146/SheldonStyles/a60a8927.jpg

The raditor was a very very tight fit so will be getting a civic rad asap. Also, need to get hold of an electronic boost controller and an ecu!

[VTHall]

thats a fucking SHED! How can anyone like these shit cars?! Look like shit and as slow as a vts!! only joking, nice car.

[GRAHAM2000VTR]

thats a fucking SHED! How can anyone like these shit cars?! Look like shit and as slow as a vts!! only joking, nice car.

how about not my cup of t but can appreciate ur work

beside his comment above just had a read throught nice car mate

sorry vthall just saw the white writing didn't think some1 could be that harsh lol

[VTHall]

how about not my cup of t but can appreciate ur work

beside his comment above just had a read throught nice car mate

sorry vthall just saw the white writing didn't think some1 could be that harsh lol

unlucky kid ;)
sax p FAIL.

[adamf0707]

This car is awesome! :y:

[VTHall]

This car is awesome! :y:

errrrr. no its not.its smart tbf.

[delux]

Weres the fucking video ! :)

[tmile09]

Thanks mate :)

What sort of problems did you get when you starting modding then dude? Yee i've read up on the 5EFE and it might be something i'll consider sometime next year! :p Cheers for the kind words!

To start every 2nd week or so the oil return from the turbo developed a leak pissing oil out of it and would have to park up wherever i noticed it, ring someone to come and tow me home and take the front mount off while i was waiting for them to come so i could tow the car.. i had the LSD box with a TRD diff..i wouldnt advise this..apart from shitting itself half way through a run in Bishopscourt it limited top speed to just under 115 even delimited..i know 115 is quick but you reach it quick enough in a 220bhp car that only weighs 980kg..When i bought the car it had 16in STR RS GT's on it and they weighed a ton and wrecked the gearbox.. i had a standard turbo for the first few months after buying it which blew its seals so got a ct9b fitted at a massive cost which only lasted 7 months before it shit itself too so thats when i decided on the 5e conversion..defo the best mod i done and ran it with another ct9 at low enough boost .7 i think that i got my hands on cheap and sold it straight on before i had more bother..Sorry to be clogging your thread here but im just letting u know of the problems i had with mine so you know what to avoid.. i had a lot more bother than what i have on here it really was something new every week.. oh yea actually 2 manifolds in just over a year..i don't know why but they kept going..one was a s/s mongoose and the other a modified WERP.. anyway best of luck with it mate you'll probably need it ha :y:

[VTHall]

Weres the fucking video ! :)

im sat next to him, he said fuck off.

[N80Jamie]

how about not my cup of t but can appreciate ur work

beside his comment above just had a read throught nice car mate

sorry vthall just saw the white writing didn't think some1 could be that harsh lol
Cheers dude :)
This car is awesome! :y:
Thankyou very muchly :y:
Weres the fucking video ! :)
I am planning to get a video at stand still, launch and drive by very soon dunna worry :p haha
To start every 2nd week or so the oil return from the turbo developed a leak pissing oil out of it and would have to park up wherever i noticed it, ring someone to come and tow me home and take the front mount off while i was waiting for them to come so i could tow the car.. i had the LSD box with a TRD diff..i wouldnt advise this..apart from shitting itself half way through a run in Bishopscourt it limited top speed to just under 115 even delimited..i know 115 is quick but you reach it quick enough in a 220bhp car that only weighs 980kg..When i bought the car it had 16in STR RS GT's on it and they weighed a ton and wrecked the gearbox.. i had a standard turbo for the first few months after buying it which blew its seals so got a ct9b fitted at a massive cost which only lasted 7 months before it shit itself too so thats when i decided on the 5e conversion..defo the best mod i done and ran it with another ct9 at low enough boost .7 i think that i got my hands on cheap and sold it straight on before i had more bother..Sorry to be clogging your thread here but im just letting u know of the problems i had with mine so you know what to avoid.. i had a lot more bother than what i have on here it really was something new every week.. oh yea actually 2 manifolds in just over a year..i don't know why but they kept going..one was a s/s mongoose and the other a modified WERP.. anyway best of luck with it mate you'll probably need it ha :y:
Fucking hell bad luck dude. As said on the thread in general chat, i've not really had any problems with mine yet. Let's hope it stays that way! haha




P.s Tom stop spamming my thread you bitch.

[scot-ish]

To start every 2nd week or so the oil return from the turbo developed a leak pissing oil out of it and would have to park up wherever i noticed it, ring someone to come and tow me home and take the front mount off while i was waiting for them to come so i could tow the car.. i had the LSD box with a TRD diff:

not possible, lsd box as standard is extra diff on the edge, this box has didferent mounts, and can't have any trd lsd retrofitted to it, trd diff only fits in the non lsd box.

your post reeks of shite to be honest.

..i wouldnt advise this..apart from shitting itself half way through a run in Bishopscourt it limited top speed to just under 115 even delimited..i know 115 is quick but you reach it quick enough in a 220bhp car that only weighs 980kg..:

fitting an lsd makes no difference to top end speed.




..When i bought the car it had 16in STR RS GT's on it and they weighed a ton and wrecked the gearbox....:

i ran 16's on both my starlets, one 330 bhp, the other 200bhp. done no harm to the gearbox.



..i had a standard turbo for the first few months after buying it which blew its seals so got a ct9b fitted at a massive cost which only lasted 7 months before it shit itself too....:

massive cost? the ct9b is the standard glanza turbo, no difference except one extra fin on the exhaust side, cost the same as the ct9a, fits the same manifold, and take 30 mins to change over.




.. so thats when i decided on the 5e conversion..defo the best mod i done and ran it with another ct9 at low enough boost .7 i think....:

a 5e on a ct9 at .7 bar will be slower than a standard vts.

.. oh yea actually 2 manifolds in just over a year..i don't know why but they kept going..one was a s/s mongoose and the other a modified WERP.. anyway best of luck with it mate you'll probably need it ha :y:

i take it you had the mongoose specially made for the ct9? and why was the WEPR modified? they make direct fit ct9, tdo4, tdo5 manifolds, there is no need for them to be "modified"


your post reeks of shite to be honest.

[N80Jamie]

Well said scot-ish ;)

[N80Jamie]

Mod List updated - Page 1

[Nathan-HxC]

This is lush, I love these cars!

[azzer1987]

nice :)

[Furio-Gazza]

I will be looking at buying one off these in the new year, have you had any major problems with yours? & what are the common faults/ issues with them if there is any? :)

BTW sweet Glanza & a great read :y:

[DanTvts]

Very impressed, looks well put together and nice and clean! I work with a lad who's got a white one. Not done many miles either, he paid quite a bit for it couple years ago i think! Recently he's made a few mods, manifold, decat, fcd, boost controller, front mount, fpr etc, running 0.8 bar, made 188bhp at Alan Jeffery's in plymouth. Dont know if you're rolled yours yet but that might give you something to compare to?

[AL3X_]

AFAIK hes got an EP82 now ;)