View Full Version : jenvey throttle bodys
toxic
29th January 2011, 20:50
I won’t to put Jenvey throttle body kit in my 106 gti, what are the best cams for this. the car will have ported and polished head with new valves. 4 into 1 manifold supper sprint exhaust and some other ecu don’t no what 1 yet can any 1 help on the matter.;)
Ryan
29th January 2011, 21:01
best cams...
You are limited to not going to wild due to being on standard internals. John @ gmc has a new camshaft design, 708s/ph3s are the usual choices before going for forged internals
toxic
30th January 2011, 13:33
best cams...
You are limited to not going to wild due to being on standard internals. John @ gmc has a new camshaft design, 708s/ph3s are the usual choices before going for forged internals
i was told i did not have to do the internals ? if i did do them what other cams can i put in m8.
Dave_P
30th January 2011, 13:37
If you change pistons you could fit any cams you want really.
Prob best to stick with 708's.
AndySAXO
30th January 2011, 13:38
If you did the internal then you could put and camshaft in the Saxo range, depends on how far you want to go.
Olly
30th January 2011, 13:46
Stick with the 708's
Check manufacturer cam specs to see what is needed to run the cam. Some require a remap, some itb's and pocketed pistons and some all the above and need solid tappets/followers to reach the desired gains..
toxic
30th January 2011, 13:58
I won’t to get up to 160bhp Throttal body kit and a remap the head is getting ported and polished.
Dave_P
30th January 2011, 14:04
You WANT 160bhp?
toxic
30th January 2011, 14:10
You WANT 160bhp?
yes m8 got another engine 106 gti 16v why can it not get up to that
Dave_P
30th January 2011, 14:26
I won’t to get up to 160bhp
"I WANT to get up to 160bhp"
Your spelling is terrible. :p
Bodies & 708's/breathing mods will give you over 160bhp on a healthy engine.
toxic
30th January 2011, 14:47
ok m8 lol
ashw106rallye
30th January 2011, 17:05
708's are best
toxic
30th January 2011, 18:57
right i will get them thanks for all your help
KamRacing
31st January 2011, 08:03
match a camshaft for the type of use the car will get. The 1321708 Cat Cams (http://www.kamracing.co.uk/index.php/citroen/citroen-saxo/saxo-engine/camshafts/citroen-saxo-vts-fast-road-camshafts-cat-cams-1321708.html) are about the limit for a fast road setup without making everything very expensive.
toxic
31st January 2011, 15:18
match a camshaft for the type of use the car will get. The 1321708 Cat Cams (http://www.kamracing.co.uk/index.php/citroen/citroen-saxo/saxo-engine/camshafts/citroen-saxo-vts-fast-road-camshafts-cat-cams-1321708.html) are about the limit for a fast road setup without making everything very expensive.
So they are a good choice to go with Jenvey throttle body kit getting head ported and polish with cat cams and Jenvey throttle body and will get some sort of ecu if it needs 1, what do you think m8 :y:
KamRacing
31st January 2011, 15:52
for a road car I would be fitting 708's. All the other mods will be a nice combination.
toxic
31st January 2011, 15:56
for a road car I would be fitting 708's. All the other mods will be a nice combination.
thanks for your help I will go down that road and hope it goes ok lol :y:
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.