Where is the hole to lock off the flywheel?

[chriswoodward]

Hi guys just doing a HG and Cam belt change on a 1.1 eastcoast ive got the cam sprocket lined up at TDC with the block and locked off.

But my question is where do you lock off the flywheel?:y:

[saxo-parts]

near the crank sensor, dead in line with oil filter.

[Jungle]

its tiny tho! Took me ages to find lol

[chriswoodward]

Much appreciated been trying to find that for the last couple of hours.

Take it an 8mm drill bit will be sufficient same as the cam?

[Jungle]

the flywheel hole is alot smaller than the cam pin hole IIRC think i used a relly thin posi driver

[saxo-parts]

6mm is nearer the mark for crank, long time since i've used drills for them as we use timing pins. drill bit is just as good though

[chriswoodward]

Yeah just looked and it's a 6mm cheers for your help lads.

[toxic]

Much appreciated been trying to find that for the last couple of hours.

Take it an 8mm drill bit will be sufficient same as the cam?

lol it took you hours to find that hole lol :homme: