Need a rocker cover bolt...

[Furio-92]

Where can i get a bolt that holds the rocker cover on? I Removed the cover, and went to put it back on and snapped it. Any help would be great. I could get some from citroen, but unsure on price.

[J222JRA]

They are cheap from dealers tbh mate.

[Furio-92]

They are cheap from dealers tbh mate.

I rang them up, and they can't find them :S Gave them my chasis number and then he started asking me whether i have had a engine conversion or not, and then told me to ring peugeot as the 106 are the same. So i did, they done the same! Useless, going to go to a scrap yard and get one, only need one.

[toxic]

ask swampy he will have some and ebay have them to.

[toxic]

http://cgi.ebay.co.uk/Saxo-VTS-Peugoet-106-GTi-Stainless-Rocker-Bolt-Kit-/370481494724?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item56426afac4

there you are m8

[SAM-S44MDS-]

Lol are your dealers retarded??

Take 30secs to find :S Ill PM you :y:

[titchster]

Umm. Aren't 8v rockers held on with 2 studs and nuts? If it's snapped, it's the stud that goes into the head...

[Furio-92]

Yeah, its the 2 bolts i need, well, 1

[Abass123]

go in scrapy prob give you for free

[Furio-92]

go in scrapy prob give you for free

Scrappies around me usually get the rocker covers sold straight away

[Ellisg93]

I've got one for you bro. PM me your address :)

[Mercy]

Scrappy ftw, i did exact same thing and while i was at it got myself a new rocker cover ;)

[Liam_]

Rocker cover stud - part number: 0250 60
Rocker cover nut - part number: 0250 62

Richard Hardie in Ashington is probably your best bet - ring up and give them the part numbers.

[Furio-92]

What is the part that the bolt screws onto? Thats the part ive snapped?

[Furio-92]

From what has been said? Am i right in thinking it is the stud?

[Bedford126]

What is the part that the bolt screws onto? Thats the part ive snapped?

I think you have the nut and bolt mixed up mate.

The nut screws onto the stud the stud screws into the cylinder head. I think you need the stud.

[Furio-92]

I think you have the nut and bolt mixed up mate.

The nut screws onto the stud the stud screws into the cylinder head.

The stud has snapped, and a part of the stud snapped off in the nut. So i need a new both. Thanks for clearing that up :) :y:

[Furio-92]

Rocker cover stud - part number: 0250 60
Rocker cover nut - part number: 0250 62

Richard Hardie in Ashington is probably your best bet - ring up and give them the part numbers.
Thanks mate, Parts place arent open on weekends, will ring them on Monday. :y:

[Furio-92]

Close thread, Sorted :y: