Log in

View Full Version : 5' jap backbox

nadk2010
3rd May 2011, 20:42
Hey guys iv just brought this backbox off ebay for 10pound, i couldnt resist on it being so cheap, its a universal jap backbox the guy sed it came off his mitsubishi evo. my saxo vtr one has just blown so im hoping this will sound nice. just wanted to know their is a small hole u can see in the pic, the guy sed that it was for the flamer kit. will this effect the cars emmisions. cheers guys and tell me what you think off the backbox. ;)

http://i1186.photobucket.com/albums/z379/nadk2010/KGrHqZjoE2IWCzO8BNuWVlH21g_12.jpg

http://i1186.photobucket.com/albums/z379/nadk2010/KGrHqFlsE2FV86FLwBNuWWByOGg_12.jpg

http://i1186.photobucket.com/albums/z379/nadk2010/KGrHqNlUE2EHcJ6gcBNuWU9n2Nw_12.jpg
Saxovch22
3rd May 2011, 20:49
AwfulLy Big
nadk2010
3rd May 2011, 20:52
i cnt complain for 10quid
RustySkull
3rd May 2011, 20:52
It's not nice, but no the hole won't effect the emissions, but it might make a funny sound... :S
coleman258
3rd May 2011, 20:53
This isn't a serious thread is it?
RustySkull
3rd May 2011, 20:54
This isn't a serious thread is it?

I'd say so lol.
nadk2010
3rd May 2011, 20:56
It's not nice, but no the hole won't effect the emissions, but it might make a funny sound... :S

what will it sound like?lol
carlsmith715
3rd May 2011, 20:56
why would someone put a universal back box on a evo
chris84
3rd May 2011, 20:58
Like it looks, shit!!!
Nathan-HxC
3rd May 2011, 20:58
I suppose his Evo was fitted with a Veyron engine aswell.
Should've gotten a respectable Saxo fitment exhaust tbh.
nadk2010
3rd May 2011, 20:59
il see how it sounds if i dont like it il get a supersprint or sumit
RustySkull
3rd May 2011, 21:00
what will it sound like?lol

You may get a small whistle or a blowing sound from it, you might not though.

The only way to find out is to fit it, but you'll have to cut your center section about to fit it, unless you weld a Saxo Flange onto it lol.
nadk2010
3rd May 2011, 21:02
You may get a small whistle or a blowing sound from it, you might not though.

The only way to find out is to fit it, but you'll have to cut your center section about to fit it, unless you weld a Saxo Flange onto it lol.

nice 1 mate, hay u got facebook?
carlsmith715
3rd May 2011, 21:03
nice 1 mate, hay u got facebook?

who hasnt got it these days haha
nadk2010
3rd May 2011, 21:05
who hasnt got it these days haha

true pal,lol
RustySkull
3rd May 2011, 21:09
nice 1 mate, hay u got facebook?

Haha yeh I do. :)
sam2kk8
3rd May 2011, 21:25
the holes for a muffler to reduce sound
badwool
3rd May 2011, 21:38
the holes for a muffler to reduce sound

hmmm seems abit low down though dont you think?

my old nurspec was quite a bit nearer the exhaust tip.
RustySkull
3rd May 2011, 21:41
hmmm seems abit low down though dont you think?

my old nurspec was quite a bit nearer the exhaust tip.

I was thinking that...
coleman258
3rd May 2011, 21:58
It's going to be a big bodge fitting that I wouldn't waste your time if I was you.
carlsmith715
3rd May 2011, 22:01
if it off an evo would he not need reducers in the pipe by about an inch or so
RustySkull
3rd May 2011, 22:04
if it off an evo would he not need reducers in the pipe by about an inch or so

Most likely... :fcuk:
col101
4th May 2011, 22:25
1. The closest that pipe has been to an evo is in a carpark.
2. That pipe will sound shit.
3. That pipe will not fit a saxo without chopping the centre/welding the pipe.
4. It was £10 for a reason.
skitts
6th May 2011, 13:35
I will guess this sounds like a tin of nails ?
RustySkull
6th May 2011, 13:41
I will guess this sounds like a tin of nails ?

It won't sound good man...
skitts
6th May 2011, 13:43
I would rather have a cherry bomb than that